201909005I : PF8100-PF8200 Data Sheet Updates Rev 8.0 and 9.0 for Ordering Information and Clarifications

NXP Semiconductors announces data sheet update revisions 8.0 and 9.0 for the PF8100-PF8200 devices associated with this notification. The new data sheet revisions provide updated ordering information and clarifications including additional details for ISW5LIM specification to ensure compatibility with the i.MX8QM microprocessors specification and clarification regarding FSOB configuration differences between PF8100 and PF8200 devices. The revision history included in the updated document provides a detailed description of the changes. Changes are summarized below.Revision 8.0: PF8100_PF8200 Data Sheet Change Summary1. Add note: "Not recommended for new designs" for part numbers MC33PF8100CCES / MC34PF8100CCEP.2. Add part numbers MC33PF8100FJES / MC34PF8100FJEP3. Remove part numbers MC33PF8200DMES / MC33PF8200DNES.4. Modify OTP Reports for the following parts: - MC33PF8100EPES / MC34PF8100EPEP- MC33PF8100EQES / MC34PF8100EQEP- MC33PF8200DBES - MC33PF8200DEES - MC33PF8200ESES5. Add note: "VSWxIN must be connected to VIN to ensure proper device operation" in Table 53 Type 1 Buck regulator electrical characteristic.6. Add note: "VSW7IN must be connected to VIN to ensure proper operation" in Table 60 Type 2 Buck regulator electrical characteristic. 7. Add note: "Input supply for switching regulators must be capable to sink current to avoid overvoltage condition during the power down sequence of the device" in Table 9 Power tree summary.Revision 9.0: PF8100_PF8200 Data Sheet Change Summary1. Add new line to clarify SW5 Peak current limit specification Table 53: Type 1 buck regulator electrical characteristics. Symbol: ISW5LIM Parameter: Current limiter - inductor peak current detection SWxILIM[1:0] = 11Min value 3.9 A / Typ value 4.5 A / Max value 5.45 A2. Add note: "Current limit applicable to SW5 to ensure maximum power requirement for the MEMC rail in i.MX8QM systems" in Table 53 Type 1 Buck regulator electrical characteristic.3. Add note: "Current limit applicable to SW1 SW2 SW3 SW4 and SW6" in Table 53 Type 1 Buck regulator electrical characteristic.4. Divide Section 14.9.11 content into two subtopics to clarify FSOB configuration differences between PF8200 and PF8100 devices.The PF8100-PF8200 revision 9.0 data sheet (including revision 8.0) is attached to this notice and is available at: https://www.nxp.com/docs/en/data-sheet/PF8100_PF8200.pdfCorresponding ZVEI Delta Qualification Matrix ID: SEM-DS-02 SEM-DS-03

変更理由

Revision 8.0 data sheet has been updated to accommodate sequence options for expanded selection of memory options and to include clarification notes for regulator electrical characteristics tables. Revision 9.0 data sheet has been updated to expand parameter ISW5LIM details to ensure clarity and compatibility with the i.MX8QM microprocessors specification as well as clarify the FSOB configuration differences between PF8100 and PF8200 devices.

対象製品の特定について

Product identification does not change

予想される影響

データシートの改訂: A new datasheet will be issued

No impact on form fit function reliability or quality.

対象品番