202001001I : i.MXRT1060 Data Sheet Rev 0.2 and Errata Rev 1.1 Updates

NXP Semiconductors announces errata update to revision 1.1 and data sheet update to revision 0.2 for i.MXRT1060. The revision history included in the updated documents provides a detailed description of the changes. Changes are summarized below.For RT1060 Chip Errata:Added following errata:* ERR050235 CCM: Incorrect clock setting for CAN affects UART clock gatingFor RT1060 Consumer DS Data Sheet Changes:1. Updated the SPI NAND Flash in the Section 1.1 Features2. Updated the features of RT1062 in the Table 1 Ordering information3. Updated the Table 81 Boot through UART1 and removed the Table Boot through UART24. Updated the figure and table numbers in the Section 6.2 12 x 12 mm package information5. Updated the Figure 53 "10 x 10 mm BGA case x package top bottom and side Views" and Figure 54 "12 x 12 mm BGA case x package top bottom and side Views"For RT1060 Industrial DS Data Sheet Changes:1. Updated the SPI NAND Flash in the Section 1.1 Features2. Updated the Table 81 Boot through UART1 and removed the Table Boot through UART23. Updated the figure and table numbers in the Section 6.2 12 x 12 mm package information4. Updated the Figure 53 "10 x 10 mm BGA case x package top bottom and side Views" and Figure 54 "12 x 12 mm BGA case x package top bottom and side Views"The i.MXRT1060 errata revision 1.1 is attached to this notice and can be found at:https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/i.mx-rt-series/i.mx-rt1060-crossover-processor-with-arm-cortex-m7-core:i.MX-RT1060?tab=Documentation_Tab&linkline=ErrataThe i.MXRT1060 data sheet revision 0.2 is attached to this notice and can be found at:https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/i.mx-rt-series/i.mx-rt1060-crossover-processor-with-arm-cortex-m7-core:i.MX-RT1060?tab=Documentation_Tab&linkline=Data-Sheet

変更理由

The errata was added for additional technical clarification on some device features.The data sheets have been updated to correct errors and / or provide additional technical clarification on some device features.

対象製品の特定について

Product identification does not change

予想される影響

データシートの改訂: A new datasheet will be issued

No impact on form fit function reliability or quality.

対象品番