202010017I : KL03Z(1N86K) Errata Update to Rev.10

NXP Semiconductors announces that the KL03Z(1N86K) Errata have been updated to new revisions: KL03Z_1N86K Rev. 10.There provides a detailed description of the changes:Added following errata:1. ERR008992 AWIC: Early NMI wakeup not detected upon entry to stop mode from VLPR mode2. ERR008777 I2C: Address match wake-up from low-power mode cannot receive data3. ERR009308 I2C: I2C does not hold bus between byte transfers in receive and may result in lost data4. ERR009457 Kinetis Flashloader/ ROM Bootloader: The peripheral auto-detect code in bootloader can falsely detect presence of SPI host causing non-responsive bootloader5. ERR008010 LLWU: CMP flag in LLWU_Fx register cleared by multiple CMP out toggles when exiting LLSx or VLLSx modes.6. ERR010527 LPUART: Setting and immediately clearing SBK bit can result in transmission of two break charactersThe updated Errata for KL03Z(1N86K) can be found at:https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/kl-series-cortex-m0-plus/kinetis-kl0x-48-mhz-entry-level-ultra-low-power-microcontrollers-mcus-based-on-arm-cortex-m0-plus-core:KL0x?fpsp=1&tab=Documentation_Tab

変更理由

The Errata have been updated to provide additional technical clarification on some device features.

対象製品の特定について

Product identification does not change

予想される影響

No impact on form fit function reliability or quality.

対象品番