コンパクトリスト
The NX3L2T384 is a dual low-ohmic single-pole single-throw analog switch. Each switch has two input/output terminals (nY and nZ) and an active LOW enable input (nE). When pin nE is HIGH, the analog switch is turned off.
Schmitt trigger action at the enable input (nE) makes the circuit tolerant to slower input rise and fall times. A low input voltage threshold allows pin nE to be driven by lower level logic signals without a significant increase in supply current ICC. This makes it possible for the NX3L2T384 to switch 4.3 V signals with a 1.8 V digital controller, eliminating the need for logic level translation.
The NX3L2T384 allows signals with amplitude up to VCC to be transmitted from nY to nZ; or from nZ to nY. Its low ON resistance (0.5 Ω) and flatness (0.13 Ω) ensures minimal attenuation and distortion of transmitted signals.
1 結果
除外 1 NRND
パーツ | コンピュータ支援設計 モデル | 状況 | Configuration | VCC (V) | Logic switching levels | RON (Ohm) | RON(FLAT) | f(-3dB) (MHz) | THD (%) | Xtalk (dB) | Power dissipation considerations | Tamb (°C) | Rth(j-a) (K/W) | th(j-top) (K/W) | パッケージタイプ |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
製造中止 | SPST-NC | 1.4 - 4.3 | CMOS/LVTTL | 0.75 | 0.3 | 60 | 0.0024 | -90 | ultra low | -40~125 | 251 | 128 | XQFN8 |
NX3L2T384GM
クイック・リファレンス ドキュメンテーションの種類.
2 ドキュメント
コンパクトリスト
この選択アイテムには該当する結果がありません。
セキュアファイルの読み込み中、しばらくお待ちください。
3 ドキュメント
コンパクトリスト
There are no recently viewed products to display.
閲覧履歴を表示または編集する