デザイン・ファイル
完全な内訳を受け取ります。 製品の設置面積などについては、 eCad ファイル.
USB Type-C High-Performance Crossbar Switch IC
- このページでは、新規設計を推奨しない製品に関する情報を掲載しています。
CBTL08GP053 is an USB Type-C High Performance Crossbar Switch IC meant to be used for Type-C connector interface high speed passive switching applications. It provides switching of high speed differential signals that correspond to various interface standards: USB3.1 (10 Gbps), DP1.3 (8.1 Gbps), PCI Express 3.0 (8 Gbps), etc. It supports switching of single ended signals over Type-C interface. In addition, side band switching of AUX and other dedicated signals for transport over SBU1 and SBU2.
It provides the I²C-bus interface for switch control, configuration and status update. It operates from a single platform power supply VDD.
This IC is targeted for a wide range of platforms (PCs, Tablets, Convertibles, Smart phones) and PC Accessories (e.g. Docks, Monitors, etc.) applications.
CBTL08GP053 is available in a small footprint package option: VFBGA40 4.75 mm x 3.25 mm, 0.5 mm pitch.
製品詳細
Features
General Features
- Supports I²C target interface Standard mode (100 kbit/s) and Fast mode (400 kbit/s)
- I²C Target address programmable up to 4 values
- Back current protection on Control pins and exposed connector side I/O pins
- Single 3.3 V power supply
-
Current consumption
- Active mode (all switches are functional): 300 μA (typ)
- Standby mode (all switches in Hi-Z): 15 μA (max)
- Operating temperature: -40 °C to 105 °C
- ESD 2 kV HBM, 500 V CDM
- Package: VFBGA40 4.75 mm x 3.25 mm, 0.5 mm pitch
High Speed Switch Features
- Supports the following interface standards: USB3.1, DP1.3, DP++, PCIe 3.0
- Supports signaling rates up to 10 Gbps
- Performs Multiplexing or Switching of High speed differential signals or Single ended signals
- All switches are direction agnostic
- Design based on both Patented and Patent pending High performance Switch technology
Target Performance Specification
- Differential signaling (peak to peak) of 1.4 V and common mode level over 0 V to 2.2 V
- 1.8 V single ended rail to rail signaling
- Ron: 7 Ω (typ)
- Insertion loss: 1.2 dB at 2.7 GHz, 1.8 dB at 5.4 GHz, 3 dB at 8.5 GHz (typ)
- Isolation: 23 dB at 2.7 GHz, 16.5 dB at 5.4 GHz (typ)
- Cross talk: 32 dB at 2.7 GHz, 24 dB at 5.4 GHz (typ)
- Return loss: 20 dB at 2.7 GHz, 16 dB at 5.4 GHz (typ)
- Very low intra pair skew
- Very low propagation delay (80 ps typical) and inter pair skew (35 ps typical)
- Switch paths selectable through the I²C-bus interface (registers for atomic and sequential switch selection)
Sideband Auxiliary Crossbar Switch Features
- Single ended 2:1 multiplexing/switching with single ended cross bar switching of both differential AUX or single ended UART or I²C or miscellaneous signals
- Switches are direction agnostic
- Switches are 5.5 V tolerant
Target Performance Specification (Typical Values)
- Ron 8 Ω (typ) at Vcm = 0.5 V to 2.65 V
- Very low intra pair skew
- Very low propagation delay (80 ps typical)
- Switch paths selectable through the I²C-bus interface (registers for atomic and sequential switch selection)
購入/パラメータ
|
|
|
|
|
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
