デザイン・ファイル
完全な内訳を受け取ります。 製品の設置面積などについては、 eCad ファイル.
High-Voltage I²C Controlled Overvoltage Protection Load Switch with OTG
The NX30P6093A is a 5.6A I²C controlled overvoltage protection load switch for USB Type-C and PD application. It includes under voltage lockout, overvoltage lockout, and over-temperature protection circuits, it is designed to automatically isolate the power switch terminals when a fault condition occurs.
NX30P6093A has a default overvoltage protection threshold, and the OVLO threshold can be adjusted by both external resistor divider on ADJ pin and internal I²C register. USB OTG is supported when the plugged accessory is recognized as an OTG device by system and a 5V source is applied on VOUT pin of NX30P6093A.
製品詳細
Features
Microcontrollers (MCUs)
- Wide supply voltage range for VIN from 2.8 V to 20.0 V
- System Power supply VDD from 3.0 V to 4.5 V
- ISW maximum 5.6 A continuous current for OVP mode
- Support 1.5 A USB OTG
- 29 V tolerance on VIN pin
- 16 mΩ (typical) ultra Low ON resistance
- Adjustable VIN overvoltage protection by both external resistor and I²C
- Built-in slew rate control for inrush current limit
- Integrated current source for VIN pin impedance detection
- Protection circuitry:
- OverTemperature Protection
- OverVoltage Protection
- Under-Voltage Lockout
- Surge protection:
- IEC61000-4-5 exceeds ±100 V on VIN
- ESD protection:
- IEC61000-4-2 contact discharge exceeds 8 kV on VIN
- IEC61000-4-2 air discharge exceeds 15kV on VIN
- HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 3 kV on all pins
- MM Class B exceeds 100 V on all the pins
- Specified from -40 °C to +85 °C
Product Longevity Program
- This product is included in the NXP Product Longevity Program ensuring a stable supply of products for your embedded designs. The NX30P6093AUK is included in the 10-year program
購入/パラメータ
|
|
|
|
|
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
