Features
Battery Cell Controller, Advanced, 6 Channels, TPL, LQFP48.
Package
HLQFP48 LQFP64, plastic, low profile quad flat package; 64 terminals; 0.5 mm pitch; 10 mm x 10 mm x 1.4 mm body.
購入オプション
NX3L1T66GW,125
製造中止
12NC: 935287569125
詳細
注文
操作機能
| パラメータ | 値 |
|---|---|
Family | NX3 |
Configuration | SPST-NO |
Function | single-pole, single-throw analog switch |
VCC (V) | 1.4 - 4.3 |
Logic switching levels | CMOS/LVTTL |
RON (Ohm) | 0.75 |
RON(FLAT) | 0.3 |
f(-3dB) (MHz) | 60 |
| パラメータ | 値 |
|---|---|
THD (%) | 0.0024 |
Xtalk (dB) | -90 |
Power dissipation considerations | ultra low |
Tamb (°C) | -40~125 |
Rth(j-a) (K/W) | 250 |
th(j-top) (K/W) | 69 |
Number of pins | 5 |
環境
| Part/12NC | 鉛フリー | EU RoHS | ハロゲンフリー | RHFインジケーター | REACH SVHC | Weight (mg) |
|---|---|---|---|---|---|---|
NX3L1T66GW,125(935287569125) | Yes | Yes | Yes |  | REACH SVHC | 5.4522056 |
品質
| Part/12NC | 安全保障機能安全 | 吸湿感度レベル (MSL) | Peak Package Body Temperature (PPT) (C°) | ||
|---|---|---|---|---|---|
| 鉛はんだ | 鉛フリーはんだ | 鉛はんだ | 鉛フリーはんだ | ||
NX3L1T66GW,125 (935287569125) | - | 1 | 1 | 240 | 260 |
配送
| Part/12NC | 関税分類番号（米国)免責事項: |
|---|---|
NX3L1T66GW,125 (935287569125) | 854239 |
詳細 NX3L1T66
Archived content is no longer updated and is made available for historical reference only.
The NX3L1T66 provides one single-pole single-throw analog switch function. It has two input/output terminals (Yand Z) and an active HIGH enable input pin (E). When E is LOW, the analog switch is turned off.
Schmitt-trigger action at the enable input (E) makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 1.4 V to 4.3 V.
A low input voltage threshold allows pin E to be driven by lower level logic signals without a significant increase in supply current ICC. This makes it possible for the NX3L1T66 to switch 4.3 V signals with a 1.8 V digital controller, eliminating the need for logic level translation.
The NX3L1T66 allows signals with amplitude up to VCC to be transmitted from nY to nZ; or from nZ to nY. Its low ON resistance (0.5 Ω) and flatness (0.13 Ω) ensures minimal attenuation and distortion of transmitted signals.