Features
Battery Cell Controller, Advanced, 6 Channels, TPL, LQFP48.
Package
HLQFP48 LQFP64, plastic, low profile quad flat package; 64 terminals; 0.5 mm pitch; 10 mm x 10 mm x 1.4 mm body.
Buy Options
P3T1755DP/Q900Z
Active
12NC: 935441479431
Details
Operating Features
| Parameter | Value |
|---|---|
Accuracy on-chip (±°C) | 0.5 |
Supply Voltage [Min to Max] (V) | 1.4 to 3.6 |
Communication protocol | I3C, I²C |
# of Addresses | 27 |
| Parameter | Value |
|---|---|
Resolution (°C) | 0.062 |
Operating Temperature (Min-Max) (℃) | -40 to 125 |
AEC-Q100 compliant | Y |
Environmental
| Part/12NC | PbFree | EU RoHS | Halogen Free | RHF Indicator | REACH SVHC | Weight (mg) |
|---|---|---|---|---|---|---|
P3T1755DP/Q900Z(935441479431) | Yes | Yes Certificate Of Analysis (CoA) | Yes |  | REACH SVHC | 62.0 |
Quality
| Part/12NC | Safe Assure Functional Safety | Moisture Sensitivity Level (MSL) | Peak Package Body Temperature (PPT) (C°) | ||
|---|---|---|---|---|---|
| Lead Soldering | Lead Free Soldering | Lead Soldering | Lead Free Soldering | ||
P3T1755DP/Q900Z (935441479431) | No | 1 | 1 | 240 | 260 |
Shipping
| Part/12NC | Harmonized Tariff (US)Disclaimer |
|---|---|
P3T1755DP/Q900Z (935441479431) | 854239 |
More about P3T1755DP
P3T1755DP is a ±0.5°C accurate temperature-to-digital converter with a -40 °C to +125 °C range. It uses an on-chip band gap temperature sensor and A-to-D conversion technique with overtemperature detection. The temperature register always stores a 12 bit two's complement data, giving a temperature resolution of 0.0625 °C P3T1755DP which can be configured for different operation conditions: continues conversion, one-shot mode or shutdown mode.
The device supports 2-wire serial I3C (up to 12.5 MHz) and I²C (up to 3.4 MHz) as communication interface. In I²C, the device supports up to four target addresses and an alert function. In I3C, the devices support in-band interrupt (IBI), where the same bus is used to report the alert interrupts.