Features
Battery Cell Controller, Advanced, 6 Channels, TPL, LQFP48.
Package
HLQFP48 LQFP64, plastic, low profile quad flat package; 64 terminals; 0.5 mm pitch; 10 mm x 10 mm x 1.4 mm body.
パッケージ
TSSOP16: plastic, thin shrink small outline package; 16 leads; 0.65 mm pitch, 5 mm x 4.4 mm x 1.1 mm body
購入オプション
PCA9516APW,118
アクティブ
12NC: 935275883118
詳細
数量
単価
| 1 - 24 | $1.46 |
| 25 - 25 | $1.46 |
| 26 - 99 | $1.46 |
| 100+ | $1.46 |
注文
在庫あり:1,790
代理店からの注文操作機能
| パラメータ | 値 |
|---|---|
Operating Temperature (°C) | -40~85 |
Operating voltage (VDC) | 2.3~3.6_tolerant_to_5.5 VDC |
Inputs | 1 |
| パラメータ | 値 |
|---|---|
Outputs | 4 |
I2C-bus (kHz) | 400 |
環境
| Part/12NC | 鉛フリー | EU RoHS | ハロゲンフリー | RHFインジケーター | REACH SVHC | Weight (mg) |
|---|---|---|---|---|---|---|
PCA9516APW,118(935275883118) | Yes | Yes Certificate Of Analysis (CoA) | Yes |  | REACH SVHC | 53.0 |
品質
| Part/12NC | 安全保障機能安全 | 吸湿感度レベル (MSL) | Peak Package Body Temperature (PPT) (C°) | フィット | MTBF | 投資家情報 | ||
|---|---|---|---|---|---|---|---|---|
| 鉛はんだ | 鉛フリーはんだ | 鉛はんだ | 鉛フリーはんだ | |||||
PCA9516APW,118 (935275883118) | No | 1 | 1 | 240 | 260 | 2.0 | 5.0E8 | 0.0 |
配送
| Part/12NC | 関税分類番号（米国)免責事項: |
|---|---|
PCA9516APW,118 (935275883118) | 854239 |
詳細 PCA9516A
The PCA9516A is a CMOS integrated circuit intended for application in I²C-bus and SMBus systems.
While retaining all the operating modes and features of the I²C-bus system, it permits extension of the I²C-bus by buffering both the data (SDAn) and the clock (SCLn) lines, thus enabling five buses of 400 pF.
The I²C-bus capacitance limit of 400 pF restricts the number of devices and bus length. Using the PCA9516A enables the system designer to divide the bus into five segments off of a hub where any segment-to-segment transition sees only one repeater delay.
It can also be used to run different buses at 5 V and 3.3 V or 400 kHz and 100 kHz buses where the 100 kHz bus is isolated when 400 kHz operation of the other bus is required.
Two or more PCA9516A's cannot be put in series. The PCA9516A design does not allow this configuration. Since there is no direction pin, slightly different 'legal' low voltage levels are used to avoid lock-up conditions between the input and the output of each repeater in the hub. A 'regular LOW' applied at the input of a PCA9516A will be propagated as a 'buffered LOW' with a slightly higher value on all the enabled outputs. When this 'buffered LOW' is applied to another PCA9515A, PCA9516A, or PCA9518A in series, the second PCA9515A, PCA9516A, or PCA9518A will not recognize it as a 'regular LOW' and will not propagate it as a 'buffered LOW' again. The PCA9510A/9511A/9513A/9514A and PCA9512A cannot be used in series with the PCA9515A, PCA9516A, or PCA9518A, but can be used in series with themselves since they use shifting instead of static offsets to avoid lock-up conditions.