デザイン・ファイル
完全な内訳を受け取ります。 製品の設置面積などについては、 eCad ファイル.
2 x 150 W Class-D Power Amplifier
- このページでは、新規設計を推奨しない製品に関する情報を掲載しています。
The TDA8950 is a high-efficiency Class D audio power amplifier. The typical output power is 2 x 150 W with a speaker load impedance of 4 Ω.
The TDA8950 is available in both HSOP24 and DBS23P power packages. The amplifier operates over a wide supply voltage range from +-12.5 V to +-40 V and features low quiescent current consumption.
製品詳細
Features
- Pin compatible with TDA8920B for both HSOP24 and DBS23P packages
- Symmetrical operating supply voltage range from +-12.5 V to +-40 V
- Stereo full differential inputs, can be used as stereo Single-Ended (SE) or mono Bridge-Tied Load (BTL) amplifier
- High output power in typical applications:
- SE 2 x 150 W, RL = 4 Ω (VP = +-37 V)
- SE 2 x 170 W, RL = 4 Ω (VP = +-39 V)
- SE 2 x 100 W, RL = 6 Ω (VP = +-37 V)
- BTL 1 x 300 W, RL = 8 Ω (VP = +-37 V)
- Low noise
- Smooth pop noise-free start-up and switch off
- Zero dead time switching
- Fixed frequency
- Internal or external clock
- High efficiency
- Low quiescent current
- Advanced protection strategy: voltage protection and output current limiting
- Thermal FoldBack (TFB)
- Fixed gain of 30 dB in SE and 36 dB in BTL applications
- Fully short-circuit proof across load
- BD modulation in BTL configuration
Target Applications
- DVD
- Mini and micro receiver
- Home Theater In A Box (HTIAB) system
- High-power speaker system
ドキュメント
クイック・リファレンス ドキュメンテーションの種類.
