デザイン・ファイル
完全な内訳を受け取ります。 製品の設置面積などについては、 eCad ファイル.
Third Generation High-Performance DisplayPort Multiplexer
CBTL06DP213 is an NXP third generation high-performance multi-channel multiplexer, meant for DisplayPort (DP) v1.3 or Embedded DisplayPort applications operating at data rate of 1.62 Gbit/s, 2.7 Gbit/s, 5.4 Gbit/s or 8.1 Gbit/s. It is designed using NXP proprietary high-bandwidth pass-gate technology and it can be used for 1 : 2 switching or 2 : 1 multiplexing of four high-speed differential AC-coupled DP channels. Further, it is capable of switching/multiplexing of Hot Plug Detect (HPD) signal as well as Auxiliary (AUX) and Display Data Channel (DDC) signals. In order to support GPUs/CPUs that have dedicated AUX and DDC I/Os, CBTL06DP213 provides an additional level of multiplexing of AUX and DDC signals delivering true flexibility and choice.
A typical application of CBTL06DP213 is on motherboards where one of two GPU DisplayPort sources needs to be selected to connect to a DisplayPort sink device or connector. A controller chip selects which path to use by setting a select signal HIGH or LOW. Due to the bidirectional nature of the signal paths, CBTL06DP213 can also be used in the reverse topology, for example, to connect one display source device to one of two display sink devices or connectors.
sot918-1_3d
製品詳細
Features
General Features
- 1 : 2 switching or 2 : 1 multiplexing of DisplayPort (v1.3 - 8.1 Gbit/s) signals
- 4 high-speed differential channels with 2 : 1 multiplexing/switching for DisplayPort main link signals
- 1 channel with 4 : 1 multiplexing/switching for AUX or DDC signals
- 1 channel with 2 : 1 multiplexing/switching for HPD signal
- High-bandwidth analog pass-gate technology
- Ron on DP high-speed channels: 14 Ω
- Low crosstalk: -35 dB at 2.7 GHz
- Low off-state isolation: -30 dB at 2.7 GHz, -25 dB at 4 GHz
- Very low intra-pair skew (5 ps typical)
- Very low inter-pair skew (< 80 ps)
- Switch/multiplexer position select CMOS input
- DDC and AUX ports tolerant to being pulled to +5 V via 2.2 kΩ resistor
- Supports HDMI/DVI incorrect dongle connection
- Single 3.3 V power supply
- Operation current of 2 mA typical,
- ESD 2 kV HBM, 500 V CDM
- Available in 5 mm x 5 mm, 0.5 mm ball pitch TFBGA48 package
Low Insertion Loss
- - 0.9 dB at 100 MHz
- - 1.3 dB at 2.7 GHz
- - 1.7 dB at 4 GHz
- - 3 dB at 11.1 GHz
Low Return Loss
- - 20.3 dB at 100 MHz
- - 16.7 dB at 1.35 GHz
- - 12.9 dB at 2.7 GHz
- - 12 dB at 4 GHz
購入/パラメータ
|
|
|
|
|
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
