Features
Battery Cell Controller, Advanced, 6 Channels, TPL, LQFP48.
Package
HLQFP48 LQFP64, plastic, low profile quad flat package; 64 terminals; 0.5 mm pitch; 10 mm x 10 mm x 1.4 mm body.
購入オプション
NTSX2102GU8H
アクティブ
12NC: 935298187125
詳細
注文
NTSX2102GU8X
製造中止
12NC: 935298187115
詳細
注文
操作機能
| パラメータ | 値 |
|---|---|
Signal Application | GPIO, I2C, SMBus, UART |
Type VLT | BiDirectional FET w/one shot |
Number of bits | 2 |
VCC(A) (Min - Max) | 1.65 to 5.5 |
VCC(B) (Min-Max) | 1.65 to 5.5 |
Supply Current (Max) (μA) | 5 |
| パラメータ | 値 |
|---|---|
Bandwidth (Max) (MHz) | 50 |
Input Type (TTL, CMOS, Schmitt Trigger) | CMOS |
Output Type (Open Drain, 3-State, Push-Pull, Pass-gate) | 3-State, Pass-gate |
Ambient Operating Temperature (Min to Max) (℃) | -40 to 125 |
AEC-Q100 compliant | N |
環境
| Part/12NC | 鉛フリー | EU RoHS | ハロゲンフリー | RHFインジケーター | REACH SVHC | Weight (mg) |
|---|---|---|---|---|---|---|
NTSX2102GU8H(935298187125) | Yes | Yes Certificate Of Analysis (CoA) | Yes |  | REACH SVHC | 2.2818199999999997 |
NTSX2102GU8X(935298187115) | Yes | Yes | Yes | | REACH SVHC | 2.47182 |
品質
| Part/12NC | 安全保障機能安全 | 吸湿感度レベル (MSL) | Peak Package Body Temperature (PPT) (C°) | ||
|---|---|---|---|---|---|
| 鉛はんだ | 鉛フリーはんだ | 鉛はんだ | 鉛フリーはんだ | ||
NTSX2102GU8H (935298187125) | No | 1 | 1 | 240 | 260 |
NTSX2102GU8X (935298187115) | No | 1 | 1 | 240 | 260 |
配送
| Part/12NC | 関税分類番号（米国)免責事項: |
|---|---|
NTSX2102GU8H (935298187125) | 854239 |
NTSX2102GU8X (935298187115) | 854239 |
製造終了品・代替品データ
| Part/12NC | 製造終了のお知らせ | 最終購入日 | 最終納品日 | 交換 |
|---|---|---|---|---|
NTSX2102GU8X (935298187115) | NOTICE | 2018-08-31 | 2018-11-30 | NTSX2102GU8H (935298187125) |
製品変更のお知らせ
| Part/12NC | 発行日 | 有効期限 | PCN | タイトル |
|---|---|---|---|---|
NTSX2102GU8X (935298187115) | 2018-12-19 | 2018-12-20 | 201711018DNU02 | Product Discontinuation Notice - Align SOIC EOL Dates |
詳細 NTSX2102
The NTSX2102 is a 2-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation. It features two 2-bit input-output ports (An and Bn), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). Both supplies can be supplied at any voltage between 1.65 V and 5.5 V. This flexibility makes the device suitable for translating between any of the voltage nodes (1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins An and OE are referenced to VCC(A) and pins Bn are referenced to VCC(B). A LOW level at pin OE causes the outputs to assume a high-impedance OFF-state. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down.