Features
Battery Cell Controller, Advanced, 6 Channels, TPL, LQFP48.
Package
HLQFP48 LQFP64, plastic, low profile quad flat package; 64 terminals; 0.5 mm pitch; 10 mm x 10 mm x 1.4 mm body.
購入オプション
TJA1152BT/0Z
アクティブ
12NC: 935376298431
詳細
数量
単価
| 1 - 25 | $2.17 |
| 26 - 99 | $2.00 |
| 100+ | $1.84 |
注文
在庫あり:7,490
代理店からの注文操作機能
| パラメータ | 値 |
|---|---|
Recommended Orderable Part Number | TJA1152BT/0Z |
MCU I/O Interface (V) | 3.3, 5.0 |
VIO Option Available | N |
Low Power Modes | Standby Mode |
Data Rate [max] kbps | 5000.0 |
CAN Channels | 1 |
Product Category | Secure CAN / High-Speed CAN / CAN FD |
Supply Voltage [Min to Max] (V) | 4.75 to 5.25 |
Data Rate [min] kbps | 40.0 |
Voltage on bus pins [Min-Max] (V) | -42 to 42 |
VESD IEC on bus pins (+/- kV) | -6 to 6 |
| パラメータ | 値 |
|---|---|
VESD HBM on bus pins (+/- kV) | -8 to 8 |
Junction Temperature (Max) (℃) | 150 |
Protection | TXD dominant timeout, overtemperature detection, undervoltage detection |
Wake-Up Pin | N |
Min High Input Levels (V) [Vio] | 2.1 |
GPIO | 0 |
Supported standards | ISO-11898-2:2016, SAE J2284-1, SAE J2284-2, SAE J2284-3, SAE J2284-4, SAE J2284-5 |
SPLIT Pin | N |
Thermal Resistance (Spec) (℃/W) | 100 |
Product Application | Automotive, Industrial |
環境
| Part/12NC | 鉛フリー | EU RoHS | ハロゲンフリー | RHFインジケーター | REACH SVHC | Weight (mg) |
|---|---|---|---|---|---|---|
TJA1152BT/0Z(935376298431) | Yes | Yes Certificate Of Analysis (CoA) | Yes |  | REACH SVHC | 67.85809893199999 |
品質
| Part/12NC | 安全保障機能安全 | 吸湿感度レベル (MSL) | Peak Package Body Temperature (PPT) (C°) | ||
|---|---|---|---|---|---|
| 鉛はんだ | 鉛フリーはんだ | 鉛はんだ | 鉛フリーはんだ | ||
TJA1152BT/0Z (935376298431) | Quality Managed | 1 | 1 | 240 | 260 |
配送
| Part/12NC | 関税分類番号（米国)免責事項: |
|---|---|
TJA1152BT/0Z (935376298431) | 854239 |
詳細 TJA1152
NXP's new secure CAN transceiver TJA1152 provides a seamless and very cost-effective solution for securing classical CAN and CAN FD communication without cryptography. The TJA1152 belongs to a new generation of automotive high-speed CAN/CAN FD transceivers, offering security functions. It provides an interface between a classical CAN or CAN FD protocol controller and the physical two-wire CAN bus. As long as no security incidents have been detected, the TJA1152 behaves like a standard CAN transceiver with Standby mode.
The security incidents that can be detected and contained are:
- Flooding the bus from the local node
- Transmitting a CAN message with an identifier that has not been assigned to the local node for transmission
- Receiving a CAN message from a remote host with an identifier that is identical to one uniquely assigned to this local node
- Tampered messages