TJA1465ATK 製品情報|NXP

オートモーティブ

インダストリアル

コンスーマ

テクノロジ

TJA1465ATK

アクティブ

TJA1465ATK

アクティブ

購入オプション

操作機能

パラメータ値
Recommended Orderable Part Number
TJA1465ATK/0J
MCU I/O Interface (V)
1.8, 3.3, 5.0
CAN Bus Robustness [Min-Max] (V)
-36 to 40
Low Power Modes
Sleep Mode with selective wake-up, Standby Mode
CAN Channels
1
Product Category
CAN FD / CAN Signal Improvement
Supply Voltage [Min to Max] (V)
4.5 to 5.5
Data Rate [min] kbps
50.0
Voltage on bus pins [Min-Max] (V)
-36 to 40
パラメータ値
VESD IEC on bus pins (+/- kV)
-8 to 8
Tvj [max] (℃)
150
Protection
Bus dominant timeout, MCU reaction timeout, TXD dominant timeout, overtemperature, undervoltage detection
Wake-Up Pin
Y
Min High Input Levels (V) [Vio]
0.7
Supported standards
ISO 11898-2:2024, ISO 26262, SAE J1939-14, SAE J2284-1, SAE J2284-2, SAE J2284-3, SAE J2284-4, SAE J2284-5
SPLIT Pin
N
Thermal Resistance (Spec) (℃/W)
70
Product Application
Automotive, Industrial

環境

Part/12NC鉛フリーEU RoHSハロゲンフリーRHFインジケーターREACH SVHCWeight (mg)
TJA1465ATK/0J(935443173118)
Yes
Yes
Certificate Of Analysis (CoA)
Yes
DREACH SVHC
23.7

品質

Part/12NC安全保障機能安全吸湿感度レベル (MSL)Peak Package Body Temperature (PPT) (C°)Maximum Time at Peak Temperatures (s)
鉛フリーはんだ鉛はんだ鉛フリーはんだ鉛はんだ鉛フリーはんだ
TJA1465ATK/0J
(935443173118)
Quality Managed
1
260
260
40
40

配送

Part/12NC関税分類番号（米国)免責事項:
TJA1465ATK/0J
(935443173118)
854239

詳細 TJA1465

The TJA1465 CAN signal improvement capability (SIC) transceiver with partial networking sleep mode, is part of the TJA146x transceiver family that implements CAN SIC as defined in ISO11898-2:2024 parameter sets A-C. The TJA1465 is fully interoperable with the high-speed classical CAN and CAN FD protocols, and fully developed and certified to be ISO 26262 ASIL-B compliant.

CAN signal improvement significantly reduces signal ringing on a network, allowing reliable CAN FD communication at 5 Mbit/s in larger topologies, and due to a much tighter bit timing symmetry performance even enables CAN FD communication up to 8 Mbit/s.

The TJA1465 supports CAN partial networking by means of selective wake-up functionality as specified in ISO 11898-2:2024, allowing the transceiver to remain in sleep mode even when CAN bus traffic is running, when it is not required to be active.

The TJA1465B offers an extended feature set on top of the TJA1465A, including a TXEN_N pin for disabling the transmitter through an external pin, and three GPIO pins which can be configured to an extended set of functionalities, including, e.g., a second TXD/ RXD channel.

The TJA1465 offers a CAN FD/ CAN XL passive feature, which in sleep mode prevents the transceiver from waking up and shields the CAN controller from CAN FD and CAN XL messages when running a mixed bus communication.

もっと見る