デザイン・ファイル
完全な内訳を受け取ります。 製品の設置面積などについては、 eCad ファイル.
16-Output Switch with SPI Control
The NXP® MC33996 is a 16-output low-side switch with a 24-bit serial input control, designed for a variety of applications including inductive, incandescent, and LED loads.
- The SPI provides both input control and diagnostic readout
- A Pulse-Width Modulation (PWM) control input may be used to pulse width modulate multiple outputs at the same duty cycle
- A dedicated reset input provides the ability to clear all internal registers to the Power-ON Reset state.
- Directly interfaces with MCUs and is compatible with both 3.3 V and 5.0 V CMOS logic levels
製品詳細
Features
Key Features
- Drain-to-source on resistance 550000 mOhm RDS(ON) (Typ)
- Operating Voltage, VPWR 5.0 V – 27 v
- Operating Voltage, SOPWR 3.1 V – 5.5 V
- Outputs current limited (0.9 A) and voltage clamped (50 V) for switching incandescent and inductive loads
- Output independent overtemperature shutdown
- PWM-programmable outputs
- OFF open load detect current can be disabled for sensitive LED applications
- Output ON short-to-VBAT and OFF short-to-ground/open detection
- SPI diagnostic reporting
- 16 channels
- Load current(IL) 0.35 A (Typ)
- Load supply voltage min. 0 V, max. 40 V
- SPI Interface and Input Controller
購入/パラメータ
|
|
|
|
|
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
