The NX3L2T66 is a dual low-ohmic single-pole single-throw analog switch. Each switch has two input/output terminals (nY and nZ) and an active HIGH enable input (nE). When pin nE is LOW, the analog switch is turned off.
Schmitt trigger action at the enable input (nE) makes the circuit tolerant to slower input rise and fall times. A low input voltage threshold allows pin nE to be driven by lower level logic signals without a significant increase in supply current ICC. This makes it possible for the NX3L2T66 to switch 4.3 V signals with a 1.8 V digital controller, eliminating the need for logic level translation.
The NX3L2T66 allows signals with amplitude up to VCC to be transmitted from nY to nZ; or from nZ to nY. Its low ON resistance (0.5 Ω) and flatness (0.13 Ω) ensures minimal attenuation and distortion of transmitted signals.
2 結果
マッチしていない 0 NRND
パーツ | 注文 | コンピュータ支援設計 モデル | ファミリー | 状況 | Configuration | 機能 | VCC (V) | Logic switching levels | RON (Ohm) | RON(FLAT) | f(-3dB) (MHz) | THD (%) | Xtalk (dB) | Power dissipation considerations | Tamb (°C) | Rth(j-a) (K/W) | th(j-top) (K/W) | パッケージタイプ | Number of pins |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
NX3 | アクティブ | SPST-NO | dual single-pole, single-throw analog switch with low threshold inputs | 1.4 - 4.3 | CMOS/LVTTL | 0.75 | 0.3 | 60 | 0.0024 | -90 | ultra low | -40~125 | 251 | 128 | XQFN8 | 8 | |||
NX3 | アクティブ | SPST-NO | dual single-pole, single-throw analog switch with low threshold inputs | 1.4 - 4.3 | CMOS/LVTTL | 0.75 | 0.3 | 60 | 0.0024 | -90 | ultra low | -40~125 | 251 | 128 | XSON8 | 8 |
クイック・リファレンス ドキュメンテーションの種類.
1-5 / 8 ドキュメント
There are no results for this selection.
サインイン 許可されたセキュアファイルにアクセス。について詳しくはこちら セキュアなアクセス権.
セキュアファイルの読み込み中、しばらくお待ちください。
1-5 の 8 ドキュメント
1 設計・ファイル
サインイン 許可されたセキュアファイルにアクセス。について詳しくはこちら セキュアなアクセス権.
セキュアファイルの読み込み中、しばらくお待ちください。