The NX3L4357 is a low-ohmic single-pole triple-throw analog switch suitable for use as an analog or digital 3:1 multiplexer/demultiplexer. It has two digital select inputs (S0 and S1), one digital enable input (E), three independent inputs/outputs (Y0, Y1 and Y2) and a common input/output (Z). The device features a broadcast mode, when S0 and S1 are both high the signal applied to pin Z is passed to Y0, Y1 and Y2.
Schmitt trigger action at the digital inputs makes the circuit tolerant to slower input rise and fall times. Low threshold digital inputs allows this device to be driven by 1.8 V logic levels in 3.3 V applications without significant increase in supply current ICC. This makes it possible for the NX3L4357 to switch 4.3 V signals with a 1.8 V digital controller, eliminating the need for logic level translation. The NX3L4357 allows signals with amplitude up to VCC to be transmitted from Z to Yn or Yn to Z. Its low ON resistance (0.5 Ω) and flatness (0.13 Ω) ensures minimal attenuation and distortion of transmitted signals.
1 結果
マッチしていない 0 NRND
パーツ | 注文 | コンピュータ支援設計 モデル | ファミリー | 状況 | Configuration | 機能 | VCC (V) | Logic switching levels | RON (Ohm) | RON(FLAT) | f(-3dB) (MHz) | THD (%) | Xtalk (dB) | Power dissipation considerations | Tamb (°C) | Rth(j-a) (K/W) | th(j-top) (K/W) | パッケージタイプ | Number of pins |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
NX3 | アクティブ | SP3T-Z | single-pole, triple-throw analog switch with low threshold inputs | 1.4 - 4.3 | CMOS/LVTTL | 0.75 | 0.35 | 30 | 0.02 | -90 | ultra low | -40~125 | 148 | 63 | XQFN10 | 10 |
クイック・リファレンス ドキュメンテーションの種類.
3 ドキュメント
There are no results for this selection.
サインイン 許可されたセキュアファイルにアクセス。について詳しくはこちら セキュアなアクセス権.
セキュアファイルの読み込み中、しばらくお待ちください。
3 ドキュメント
1 設計・ファイル
サインイン 許可されたセキュアファイルにアクセス。について詳しくはこちら セキュアなアクセス権.
セキュアファイルの読み込み中、しばらくお待ちください。