Kinetis® KL2x-72/96 MHz, USB Ultra-Low-Power Microcontrollers (MCUs) based on Arm® Cortex®-M0+ Core
デザイン・ファイル
完全な内訳を受け取ります。 製品の設置面積などについては、 eCad ファイル.
Quad 100 mΩ / Dual 50 mΩ, 3.0 V to 60 V High-Side Switch
The MC33XS2410 is a four channel self-protected high-side switch. Featuring advanced digital monitoring and control function, the device is operational from 3.0 V to 60 V. As a result of high-level integration, the embedded 12-bit analog-to-digital converter enables a drastically simplified hardware design and MCU software control.
This product has been qualified to the appropriate automotive electronics council (AEC) standard Q100 and is suitable for use in automotive applications.
The device is controlled by SPI port for configuration, monitoring and diagnostics of the outputs. Whenever communication with the MCU is lost, the device enters a safe operation mode, but remains operational, controllable and protected.
製品詳細
ブロック図
Features
Device Overview
- Four fully protected 100 mΩ / dual 50 mΩ (at 25 °C) high-side switches
- Active current limitation is 5A
- Configurable parallel mode to double current capability
Modes of Operation
- 16-bit SPI port communication 3.3 V / 5 V compatible with daisy chain capability
- Outputs controllable via SPI-bus or direct inputs
- Diagnostic status reported via SPI-bus
- Watchdog for invalid commands or inactive SPI, with programmable timeout
- Configurable safe mode
- Standby mode with very low power consumption
Key Features
- Programmable interrupt generator that reports to FAULTB pin or SPI-bus
- Four independent PWM modules programmable from 0.5 Hz to 2 kHz with internal or external clock
- Protection for battery transient overvoltage and reverse polarity battery connection
- Digital PI PWM closed loop current regulation
- 10 mA open load detection in ON state
- Latch off with configurable auto retry
- Configurable severe short-circuit and overload protection
- Programmable active current limit threshold to minimize short-circuit effect
- Load current(IL) 5 A (Typ)
- Load current(IL) 6 A (Max)
- Load supply voltage 3 V (Min), 60 V (Max)
- 4 Channels
ADC Features
- 12 bits ADC, which reports:
- Current from 5 mA to 5 A
- Voltage from 0.5 V to 65 V
- Temperature warning for each channel and central die monitoring
Automotive Standards
- Qualified in accordance with AEC Q100 grade 1
- Electrical transient disturbance immunity according of ISO 7637-2 and ISO 16750-2
Product Longevity Program
- This product is included in the NXP Product Longevity Program ensuring a stable supply of products for your embedded designs. The MC33XS2410 is included in the 15-year program
関連製品
S32K1 車載向け汎用マイクロコントローラ
購入/パラメータ
|
|
|
|
|
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ドキュメント
クイック・リファレンス ドキュメンテーションの種類.
