Features
Battery Cell Controller, Advanced, 6 Channels, TPL, LQFP48.
Package
HLQFP48 LQFP64, plastic, low profile quad flat package; 64 terminals; 0.5 mm pitch; 10 mm x 10 mm x 1.4 mm body.
購入オプション
LPC1517JBD64E
アクティブ
12NC: 935302761551
詳細
注文
LPC1517JBD64Y
アクティブ
12NC: 935302761518
詳細
注文
操作機能
| パラメータ | 値 |
|---|---|
Core Type | Arm Cortex-M3 |
Operating Frequency [Max] (MHz) | 72 |
Flash (kB) | 64 |
SRAM (kB) | 12 |
EEPROM (kB) | 4 |
Serial Communication | 1 x I²C, 2 x SPI, 3 x UART |
CAN | 1 |
| パラメータ | 値 |
|---|---|
Timers [Number, bits] | 4 x 16, 4 x 32 |
PWM [Number, bits] | 28 x 16 |
ADC [Number, bits] | 2 x 12 |
GPIO | 46 |
Supply Voltage [Min to Max] (V) | 2.4 to 3.6 |
Ambient Operating Temperature (Min to Max) (℃) | -40 to 105 |
環境
| Part/12NC | 鉛フリー | EU RoHS | ハロゲンフリー | RHFインジケーター | REACH SVHC | Weight (mg) |
|---|---|---|---|---|---|---|
LPC1517JBD64E(935302761551) | Yes | Yes Certificate Of Analysis (CoA) | Yes |  | REACH SVHC | 365.98918656 |
LPC1517JBD64Y(935302761518) | Yes | Yes Certificate Of Analysis (CoA) | Yes | | REACH SVHC | 365.98918656 |
品質
| Part/12NC | 安全保障機能安全 | 吸湿感度レベル (MSL) | Peak Package Body Temperature (PPT) (C°) | ||
|---|---|---|---|---|---|
| 鉛はんだ | 鉛フリーはんだ | 鉛はんだ | 鉛フリーはんだ | ||
LPC1517JBD64E (935302761551) | No | 3 | 3 | 240 | 260 |
LPC1517JBD64Y (935302761518) | No | 3 | 3 | 240 | 260 |
配送
| Part/12NC | 関税分類番号（米国)免責事項: | 輸出規制品目番号（米国） |
|---|---|---|
LPC1517JBD64E (935302761551) | 854231 | 3A991A2 |
LPC1517JBD64Y (935302761518) | 854231 | 3A991A2 |
製品変更のお知らせ
| Part/12NC | 発行日 | 有効期限 | PCN | タイトル |
|---|---|---|---|---|
LPC1517JBD64E (935302761551) | 2020-12-15 | 2020-12-16 | 202011011I | NXP Will Add a Sealed Date to the Product Label |
LPC1517JBD64Y (935302761518) |
詳細 LPC1517JBD64
The LPC1500 microcontroller series are optimized for fast, easy, and high-precision motor control and incorporate all the features required for high-accuracy sensored and sensorless motor control, enabling simultaneous control of two motors in highly flexible configurations. Based on the Arm® Cortex™-M3 processor, the LPC1500 microcontroller series has two 12-bit, 12-channel, 2 Msps ADCs and an on-chip quadrature encoder interface (QEI) to enable highly accurate control of both sensored and sensorless motor combinations. Four on-chip comparators enable fast-response over-current/voltage monitoring and protection; and four flexible SCTimer/PWM timers provide up to 28 PWM channels in a tightly coupled analog and timing subsystem, with minimal load on the CPU. Ideal for use with a wide range of brushless DC (BLDC) motors, permanent-magnet synchronous motors (PMSM), and AC induction motors (ACIM) commonly found in products such as large home appliances, HVAC, industrial pumps and generators, and more. They are also well suited for industrial applications requiring high-precision data sampling and real-time control, such as digital power and instrumentation. The LPC1500 series of microcontrollers are fully supported by the LPC software ecosystem and an extensive collection of tools, drivers and middleware.
With ultra-efficient motor control firmware, easy-to-use GUI-based tuning tools, and two new motor control solution kits, NXP LPC1500 microcontrollers simplify evaluation and development of motor control applications, without requiring deep motor control experience.