Features
Battery Cell Controller, Advanced, 6 Channels, TPL, LQFP48.
Package
HLQFP48 LQFP64, plastic, low profile quad flat package; 64 terminals; 0.5 mm pitch; 10 mm x 10 mm x 1.4 mm body.
パッケージ
XSON8: plastic, extremely thin small outline package; 8 terminals; 0.6 mm pitch; 1 mm x 1.95 mm x 0.5 mm body
購入オプション
NX3L1T53GT,115
アクティブ
12NC: 935285907115
詳細
注文
操作機能
| パラメータ | 値 |
|---|---|
Family | NX3 |
Configuration | SPDT-Z |
Function | single-pole, double-throw analog switch with low threshold inputs |
VCC (V) | 1.4 - 4.3 |
Logic switching levels | CMOS/LVTTL |
RON (Ohm) | 0.75 |
RON(FLAT) | 0.3 |
f(-3dB) (MHz) | 60 |
| パラメータ | 値 |
|---|---|
THD (%) | 0.0024 |
Xtalk (dB) | -90 |
Power dissipation considerations | ultra low |
Tamb (°C) | -40~125 |
Rth(j-a) (K/W) | 251 |
th(j-top) (K/W) | 128 |
Number of pins | 8 |
環境
| Part/12NC | 鉛フリー | EU RoHS | ハロゲンフリー | RHFインジケーター | REACH SVHC | Weight (mg) |
|---|---|---|---|---|---|---|
NX3L1T53GT,115(935285907115) | Yes | Yes Certificate Of Analysis (CoA) | Yes |  | REACH SVHC | 2.2491948749999997 |
品質
| Part/12NC | 安全保障機能安全 | 吸湿感度レベル (MSL) | Peak Package Body Temperature (PPT) (C°) | フィット | MTBF | 投資家情報 | ||
|---|---|---|---|---|---|---|---|---|
| 鉛はんだ | 鉛フリーはんだ | 鉛はんだ | 鉛フリーはんだ | |||||
NX3L1T53GT,115 (935285907115) | No | 1 | 1 | 240 | 260 | 3.29 | 3.03951367781155E8 | 0.0 |
配送
| Part/12NC | 関税分類番号（米国)免責事項: |
|---|---|
NX3L1T53GT,115 (935285907115) | 854239 |
詳細 NX3L1T53
The NX3L1T53 is a low-ohmic single-pole double-throw analog switch suitable for use as an analog or digital 2:1 multiplexer/demultiplexer. It has a digital select input (S), two independent inputs/outputs (Y0 and Y1), a common input/output (Z) and an active LOW enable input (E). When pin E is HIGH, the switch is turned off.
Schmitt trigger action at the digital inputs makes the circuit tolerant to slower input rise and fall times. Low threshold digital inputs allows this device to be driven by 1.8 V logic levels in 3.3 V applications without significant increase in supply current ICC. This makes it possible for the NX3L1T53 to switch 4.3 V signals with a 1.8 V digital controller, eliminating the need for logic level translation. The NX3L1T53 allows signals with amplitude up to VCC to be transmitted from Z to Y0 or Y1; or from Y0 or Y1 to Z. It’s low ON resistance (0.5 Ω) and flatness (0.13 Ω) ensures minimal attenuation and distortion of transmitted signals.