The NTSX2102 is a 2-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation. It features two 2-bit input-output ports (An and Bn), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). Both supplies can be supplied at any voltage between 1.65 V and 5.5 V. This flexibility makes the device suitable for translating between any of the voltage nodes (1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins An and OE are referenced to VCC(A) and pins Bn are referenced to VCC(B). A LOW level at pin OE causes the outputs to assume a high-impedance OFF-state. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down.
Participating products are available for a minimum of 10 years. Designated participating products developed for the automotive, telecom and medical segments are available for a minimum of 15 years.
2 結果
マッチしていない 0 NRND
パーツ | 注文 | コンピュータ支援設計 モデル | 状況 | Signal Application | Type VLT | Number of bits | VCC(A) (Min - Max) | VCC(B) (Min-Max) | Supply Current (Max) (μA) | Bandwidth (Max) (MHz) | Input Type (TTL, CMOS, Schmitt Trigger) | Output Type (Open Drain, 3-State, Push-Pull, Pass-gate) | Ambient Operating Temperature (Min to Max) (℃) | AEC-Q100 compliant | パッケージタイプ | Package Dimensions (LxWxZ (mm)) | 標準価格 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
アクティブ | GPIO, I2C, SMBus, UART | BiDirectional FET w/one shot | 2 | 1.65 to 5.5 | 1.65 to 5.5 | 5 | 50 | CMOS | 3-State, Pass-gate | -40 to 125 | N | XQFN8 | 1.4 x 1.2 x 0.5 | 1K @ US$0.25 | |||
アクティブ | GPIO, I2C, SMBus, UART | BiDirectional FET w/one shot | 2 | 1.65 to 5.5 | 1.65 to 5.5 | 5 | 50 | CMOS | 3-State, Pass-gate | -40 to 85 | N | HXSON8 | 3 x 2 x 0.5 | 1K @ US$0.28 |
6 ドキュメント
コンパクトリスト
2 設計・ファイル
