デザイン・ファイル
クイック・リファレンス
設計・ファイルの種類.
1 設計・ファイル
完全な内訳を受け取ります。 製品の設置面積などについては、 eCad ファイル.
-
シンボルおよびフットプリント
Kinetis® Symbols, Footprints and Models
Kinetis® KW40Z-2.4 GHz Dual Mode: Bluetooth Low Energy and 802.15.4 Wireless Radio Microcontroller (MCU) based on Arm® Cortex®-M0+ Core
Note: K32W061/41 is preferred for any new Zigbee®, Thread and Bluetooth® LE 5.0 design. No new software releases planned
The KW40Z is a highly-integrated single-chip device that enables Bluetooth® Smart/Bluetooth® Low Energy v4.1 and IEEE® 802.15.4-2011 RF connectivity for portable, extremely low-power embedded systems. Applications include portable healthcare devices, wearable sports and fitness devices, AV remote controls, computer keyboards and mice, gaming controllers, access control, security systems, smart energy and home area networks.
The KW40Z MCU integrates a 2.4 GHz transceiver supporting a range of FSK/GFSK and O-QPSK modulations, an Arm® Cortex®-M0+ CPU, 160 KB Flash and 20 KB SRAM, Bluetooth Low Energy Link Layer hardware, 802.15.4 packet processor, hardware security and peripherals optimized to meet the requirements of the target applications. The KW40Z has enough on-chip memory to concurrently run both a Bluetooth Low Energy stack and an IEEE 8021.5.4 MAC/PHY for multi-mode applications.
製品詳細
ブロック図
Features
Multi-Protocol Radio
- 2.4 GHz Bluetooth Low Energy version 4.1 Compliant
- IEEE Std. 802.15.4-2011 Standard Compliant
- Typical Receiver Sensitivity (Bluetooth Low Energy) = -91 dBm
- Typical Receiver Sensitivity (802.15.4) = -102 dBm
- Programmable Transmitter Output Power: -20 dBm to +5 dBm
Core and Memories
- Up to 48 MHz Arm® Cortex®-M0+ core
- On-chip 160 KB Flash memory
- On-chip 20 KB SRAM
Low Power Consumption and Operating Voltage Ranges
- Nine low-power modes to provide power optimization based on application requirements
- Typical Rx/Tx Current (DC/DC Enabled): 6.5 mA / 8.4 mA
- Bypass Voltage: 1.71V to 3.6V
- DCDC Converter Buck Configuration: 2.1V to 4.2V
- DCDC Converter Boost Configuration: 0.9V to 1.795V
Analog modules
- 16-bit Analog-to-Digital Converter (ADC)
- 12-bit Digital-to-Analog Converter (DAC)
- 6-bit High Speed Analog Comparator (CMP)
Security
- AES-128 Accelerator (AESA), True Random Number Generator (TRNG)
Supported Software
- Bluetooth Low Energ Host Stack and Profiles, 802.15.4 MAC and SMAC
- Kinetis® Software Development Kit (SDK)
- The FreeRTOS kernel and a bare-metal non-preemptive task scheduler
部品番号： MKW40Z160VHT4.
比較表
Kinetis KW40Z Family Recommended Solutions
| Part Number | Wireless Connectivity Protocol | Package Size | Hardware Development Tool |
| MKW40Z160VHT4 | Bluetooth Low Energy and IEEE 802.15.4 | 7 mm x 7 mm x 1 mm 48-pin Laminate QFN | FRDM-KW40Z USB-KW40Z |
| MKW30Z160VHM4 | Bluetooth Low Energy | 5 mm x 5 mm x 1 mm 32-pin Laminate QFN | |
| MKW20Z160VHT4 | IEEE 802.15.4 | 7 mm x 7 mm x 1 mm 48-pin Laminate QFN |
MCUXpresso Software and Tools
MCUXpresso Config Tools – A comprehensive suite of system configuration tools, including pins, clocks, SDK builder and more.
MCUXpresso SDK – An open-source software development kit (SDK) built specifically for your processor and evaluation board selections.
MCUXpresso IDE – An easy-to-use integrated development environment (IDE) for creating, building, debugging, and optimizing your application.
Protocol Stacks
Connectivity Software
Kinetis Connectivity Software Version 1.0.1 includes the following components:
- KW40Z Bluetooth® low energy v4.2 stack, v1.1.4
- KW40Z IEEE® 802.15.4-2006/2011 MAC/PHY implementation v5.2.4
- KW40Z Simple Media Access Controller (SMAC) v3.2.4
- KW40Z-enabled Connectivity Framework
NXP Designs: Reference Design Library
Technical content and expertise to help jump start your design and get you to production faster.購入/パラメータ
|
|
|
|
|
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ドキュメント
クイック・リファレンス ドキュメンテーションの種類.
1-5 の 22 ドキュメント
-
データ・シート
MKW40Z/30Z/20Z Data Sheet
-
リファレンス・マニュアル
MKW40Z/30Z/20Z Reference Manual
-
リファレンス・マニュアル
KW40 ZumoBot API Reference Manual
-
アプリケーション・ノート
MKW4xZ/3xA/2xZ DCDC Power Management
設計・リソース
ハードウェア
クイック・リファレンス
ボードタイプ.
1-5 の 8 ハードウェア提供
-
-
-
エミュレータ、プローブ、プログラマUniversal Multilink開発インターフェース
-
エミュレータ、プローブ、プログラマPEmicro Cyclone programmer
-
エミュレータ、プローブ、プログラマPEmicro Cyclone FX programmer
ソフトウェア
クイック・リファレンス ソフトウェア・タイプ.
1-5 の 6 ソフトウェア・ファイル
-
BSPとデバイスドライバ
TFS Flash Driver Software for Kinetis and ColdFire+ Microcontrollers
-
接続ソフトウェア
Test Tool for Connectivity Products
-
接続ソフトウェア
Kinetis KW40Z Connectivity Software
-
追加ソフトウェアを利用可能 パートナー・ソリューションの特集を表示.
-
OSおよびRTOS
Zephyr™ OS for Edge Connected Devices
-
デバッグと可視化ツール
IoT Toolbox - Google Android app
注: より快適にご利用いただくために、ソフトウェアのダウンロードはデスクトップで行うことを推奨します。
