Features
Battery Cell Controller, Advanced, 6 Channels, TPL, LQFP48.
Package
HLQFP48 LQFP64, plastic, low profile quad flat package; 64 terminals; 0.5 mm pitch; 10 mm x 10 mm x 1.4 mm body.
パッケージ
TSSOP10: plastic, thin shrink small outline package; 10 leads; 0.5 mm pitch; 3 mm x 3 mm x 1.1 mm body
購入オプション
PCA9537DPZ
アクティブ
12NC: 935277495431
詳細
操作機能
| パラメータ | 値 |
|---|---|
No of bits | 4 |
VDD [min] | 2.3 |
VDD [max] | 5.5 |
Over volt tolerant | Y |
No of supplies | 1 |
Standby current [typ] (µA) | 0.25 |
Max Sink Current per bit (mA) | 25 |
Max Sink Current, per package (mA) | 100 |
Source Current per bit (mA) | 10 |
| パラメータ | 値 |
|---|---|
Interrupt output pin | Y |
Reset input pin | Y |
Output mode | Totem pole |
Input mode: invert option | Y |
I2C-bus (kHz) | 400 |
Footprint body and leads | 15.5 |
Operating Temperature (°C) | -40~85 |
No of Addresses | 1 |
環境
| Part/12NC | 鉛フリー | EU RoHS | ハロゲンフリー | RHFインジケーター | REACH SVHC | Weight (mg) |
|---|---|---|---|---|---|---|
PCA9537DPZ(935277495431) | Yes | Yes Certificate Of Analysis (CoA) | Yes |  | REACH SVHC | 23.1 |
品質
| Part/12NC | 安全保障機能安全 | 吸湿感度レベル (MSL) | Peak Package Body Temperature (PPT) (C°) | フィット | MTBF | 投資家情報 | ||
|---|---|---|---|---|---|---|---|---|
| 鉛はんだ | 鉛フリーはんだ | 鉛はんだ | 鉛フリーはんだ | |||||
PCA9537DPZ (935277495431) | No | 1 | 1 | 240 | 260 | 2.0 | 5.0E8 | 0.0 |
配送
| Part/12NC | 関税分類番号（米国)免責事項: |
|---|---|
PCA9537DPZ (935277495431) | 854239 |
製品変更のお知らせ
| Part/12NC | 発行日 | 有効期限 | PCN | タイトル |
|---|---|---|---|---|
PCA9537DPZ (935277495431) | 2021-10-05 | 2022-01-04 | 202104008F01 | SOT552-1 Transfer from ATP-1 to ASEN |
PCA9537DPZ (935277495431) | 2021-05-24 | - | 202104008A | SOT552-1 Transfer from ATP-1 to ASEN |
詳細 PCA9537DP
The PCA9537 is a 10-pin CMOS device that provides 4 bits of General Purpose parallel Input/Output (GPIO) expansion with interrupt and reset for I²C-bus/SMBus applications and was developed to enhance the NXP Semiconductors family of I²C-bus I/O expanders. I/O expanders provide a simple solution when additional I/O is needed for ACPI power switches, sensors, push-buttons, LEDs, fans, etc.
The PCA9537 consists of a 4-bit Configuration register (input or output selection), 4-bit Input Port register, 4-bit Output Port register and a 4-bit Polarity Inversion register (active HIGH or active LOW operation). The system controller can enable the I/Os as either inputs or outputs by writing to the I/O configuration bits. The data for each input or output is kept in the corresponding Input Port or Output Port register. The polarity of the Input Port register can be inverted with the Polarity Inversion register. All registers can be read by the system controller.
The PCA9537 open-drain interrupt output (INT) is activated when any input state differs from its corresponding Input Port register state and is used to indicate to the system controller that an input state has changed. The power-on reset sets the registers to their default values and initializes the device state machine. The RESET pin causes the same reset/initialization to occur without de-powering the device.
The I²C-bus address is fixed and allows only one device on the same I²C-bus/SMBus.