Features
Battery Cell Controller, Advanced, 6 Channels, TPL, LQFP48.
Package
HLQFP48 LQFP64, plastic, low profile quad flat package; 64 terminals; 0.5 mm pitch; 10 mm x 10 mm x 1.4 mm body.
購入オプション
No items available
操作機能
| パラメータ | 値 |
|---|---|
Standby current [typ] (µA) | 10 |
Operating Temperature (°C) | 0~125 |
Accuracy on-chip (±°C) | 2@+60~100?3@0~125 |
Operating voltage (VDC) | 3.0~5.5 |
| パラメータ | 値 |
|---|---|
Assignable addresses | 8 |
I2C/SMBus clock (kHz) | 400 |
Accuracy remote (±°C) | 1@+60~100?3@0~125 |
環境
情報なし
品質
情報なし
配送
情報なし
詳細 SA56004X
The NXP Semiconductors SA56004X is an SMBus compatible, 11-bit remote/local digital temperature sensor with over-temperature alarms. The remote channel of the SA56004X monitors a diode junction, such as a substrate PNP of a microprocessor or a diode connected transistor such as the 2N3904 (NPN) or 2N3906 (PNP). With factory trimming, remote sensor accuracy of ±1 °C is achieved.
Under-temperature and over-temperature alert thresholds can be programmed to cause the ALERT output to indicate when the on-chip or remote temperature is out of range. This output may be used as a system interrupt or SMBus alert. The T_CRIT output is activated when the on-chip or remote temperature measurement rises above the programmed T_CRIT threshold register value. This output may be used to activate a cooling fan, send a warning or trigger a system shutdown. To further enhance system reliability, the SA56004X employs an SMBus time-out protocol. The SA56004X has a advanced device architecture.
The SA56004X is available in the SO8, TSSOP8 and HVSON8 packages. SA56004X has 8 factory-programmed device address options. The SA56004X is pin-compatible with the LM86, MAX6657/8, and ADM1032.