Features
Battery Cell Controller, Advanced, 6 Channels, TPL, LQFP48.
Package
HLQFP48 LQFP64, plastic, low profile quad flat package; 64 terminals; 0.5 mm pitch; 10 mm x 10 mm x 1.4 mm body.
パッケージ
X2QFN: X2QFN12: plastic, super thin quad flat package; no leads; 12 terminals; body 1.6 x 1.6 x 0.35 mm
購入オプション
PTN5150AHXMP
アクティブ
12NC: 935307148528
詳細
数量
単価
| 1 - 24 | $0.46 |
| 25 - 99 | $0.46 |
| 100+ | $0.46 |
注文
在庫あり:3,602
代理店からの注文PTN5150AHXZ
製造中止
12NC: 935307148537
詳細
注文
操作機能
| パラメータ | 値 |
|---|---|
Operating Temperature (Min-Max) (℃) | -40 to 85 |
Ambient Operating Temperature (Min to Max) (℃) | -40 to 85 |
環境
| Part/12NC | 鉛フリー | EU RoHS | ハロゲンフリー | RHFインジケーター | REACH SVHC | Weight (mg) |
|---|---|---|---|---|---|---|
PTN5150AHXMP(935307148528) | Yes | Yes Certificate Of Analysis (CoA) | Yes |  | REACH SVHC | 2.4867 |
PTN5150AHXZ(935307148537) | Yes | Yes | Yes | | REACH SVHC | 2.4867 |
品質
| Part/12NC | 安全保障機能安全 | 吸湿感度レベル (MSL) | Peak Package Body Temperature (PPT) (C°) | ||
|---|---|---|---|---|---|
| 鉛はんだ | 鉛フリーはんだ | 鉛はんだ | 鉛フリーはんだ | ||
PTN5150AHXMP (935307148528) | No | 3 | 3 | 240 | 260 |
PTN5150AHXZ (935307148537) | No | 3 | 3 | 240 | 260 |
配送
| Part/12NC | 関税分類番号（米国)免責事項: |
|---|---|
PTN5150AHXMP (935307148528) | 854239 |
PTN5150AHXZ (935307148537) | 854239 |
製品変更のお知らせ
| Part/12NC | 発行日 | 有効期限 | PCN | タイトル |
|---|---|---|---|---|
PTN5150AHXMP (935307148528) | 2020-12-15 | 2020-12-16 | 202011011I | NXP Will Add a Sealed Date to the Product Label |
PTN5150AHXZ (935307148537) | ||||
PTN5150AHXMP (935307148528) | 2018-03-21 | 2018-04-21 | 201803018F01 | PTN5150A Pin 1 T&R Orientation Alignment |
PTN5150AHXMP (935307148528) | 2017-04-05 | 2017-05-06 | 201703017I | PTN5150x (Family) Datasheet Update |
詳細 PTN5150
PTN5150 is a small thin low power CC Logic chip supporting the USB Type-C connector application with Configuration Channel (CC) control logic detection and indication functions. The features of PTN5150 enable USB Type-C connector to be used in both host and device ends of the Type-C cable. It can support Type-C to USB legacy cables and adapters defined in USB Type-C Spec. PTN5150 can work autonomously, or can connect to a controller through I²C-bus interface.
PTN5150 can be configured to dual role, host, or device mode through external configuration pin or through I²C interface. The CC control logic detection and indication block supports 3 current modes (default current 500 mA/900 mA, medium current 1.5 A and high current 3.0 A) in DFP advertisement's perspective. When in UFP advertisement's perspective, the control logic will detect if a DFP with different pull-up Rp current source is connected. In addition, it will detect if Ra is present on CC1/CC2 pins. Upon detection of plug orientation, pin ID will indicate if PTN5150 is working under either host role or device role, and other status will also be reflected in I²C registers.