デザイン・ファイル
完全な内訳を受け取ります。 eCad ファイルで製品のフットプリントなどを確認してください。
コンパクトリスト
Dual High-Speed CAN Transceiver with Standby Mode
- このページでは、新規設計を推奨しない製品に関する情報を掲載しています。
The TJA1048 is a dual high-speed CAN transceiver that provides an interface between a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus. The transceiver is designed for high-speed CAN applications in the automotive industry, providing the differential transmit and receive capability to (a microcontroller with) a CAN protocol controller.
The TJA1048 belongs to the third generation of high-speed CAN transceivers from NXP Semiconductors, offering significant improvements over first- and second-generation devices such as the TJA1040. It offers improved Electro Magnetic Compatibility (EMC) and ElectroStatic Discharge (ESD) performance, and also features:
- Ideal passive behavior to the CAN bus when the supply voltage is off
- A very low-current Standby mode with bus wake-up capability on both channels
- Can be interfaced directly to microcontrollers with supply voltages from 3 V to 5 V
The TJA1048 implements the CAN physical layer as defined in the current ISO11898 standard (ISO11898-2:2003, ISO11898-5:2007) and the pending updated version of ISO 11898-2:2016. Pending the release of the updated version of ISO11898-2:2016 including CAN FD and SAE J2284-4/5, additional timing parameters defining loop delay symmetry are specified. This implementation enables reliable communication in the CAN FD fast phase at data rates up to 5 Mbit/s.
These features make the TJA1048 an excellent choice for all types of HS-CAN networks containing more than one HS-CAN interface that require a low-power mode with wake-up capability via the CAN bus, especially for Body Control and Gateway units.
製品詳細
Features
General
- Two TJA1042/3 HS-CAN transceivers combined monolithically in a single package
- Fully ISO 11898-2:2003 and ISO 11898-5:2007 compliant
- Timing guaranteed for data rates up to 5 Mbit/s in the CAN FD fast phase
- Suitable for 12 V and 24 V systems
- Low electromagnetic emission (EME) and high ElectroMagnetic Immunity (EMI)
- VIO input allows for direct interfacing with 3 V to 5 V microcontrollers
- Available in SO14 and HVSON14 packages
- Leadless HVSON14 package (3.0 mm × 4.5 mm) with improved Automated Optical Inspection (AOI) capability
- Dark green product (halogen free and Restriction of Hazardous Substances (RoHS) compliant)
- AEC-Q100 qualified
Low-power management
- Very low-current Standby mode with host and bus wake-up capability
- Functional behavior predictable under all supply conditions
- Transceiver disengages from the bus when not powered up (zero load)
- Wake-up receiver powered by VIO; allows shut down of VCC
Protection
- High ESD handling capability on the bus pins
- Bus pins protected against transients in automotive environments
- Transmit Data (TXD) dominant time-out function
- Undervoltage detection on pins VCC and VIO
- Thermally protected
比較表
| Part Number | New Generation Recommendation |
|---|---|
| TJA1048T,112 | TJA1448BT/0Z |
| TJA1048T,118 | TJA1448BT/0Z |
| TJA1048TK,118 | TJA1059TKJ |
購入/パラメータ
2 結果
除外 2 NRND
パーツ | 注文 | コンピュータ支援設計 モデル | 状況 | Recommended Orderable Part Number | MCU I/O Interface (V) | Low Power Modes | データ・レート（最大）（Kbps） | パッケージタイプ | CAN Channels | 製品カテゴリー | 電源電圧 [最小 - 最大] (V) | データ・レート（最小）（Kbps） | Voltage on bus pins [Min-Max] (V) | VESD IEC on bus pins (+/- kV) | VESD HBM on bus pins (+/- kV) | VIO Option Available | Junction Temperature (Max) (℃) | 保護 | Wake-Up Pin | Min High Input Levels (V) [Vio] | 汎用I/O | Supported standards | SPLIT Pin | Thermal Resistance (Spec) (℃/W) | Product Application |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
新規採用非推奨 | TJA1048T,118 | 3.3, 5.0 | Standby Mode | 5000.0 | SO14 | 2 | CAN FD / High-Speed CAN | 4.5 to 5.5 | 40.0 | -58 to 58 | -6 to 6 | -6 to 6 | Y | 150 | TXD dominant timeout, overtemperature detection, undervoltage detection | N | 0.7 | 14 | ISO-11898-2:2016, SAE J2284-1, SAE J2284-2, SAE J2284-3, SAE J2284-4, SAE J2284-5 | N | 65 | Automotive, Industrial | |||
新規採用非推奨 | TJA1048TK,118 | 3.3, 5.0 | Standby Mode | 5000.0 | HVSON14 | 2 | CAN FD / High-Speed CAN | 4.5 to 5.5 | 40.0 | -58 to 58 | -6 to 6 | -6 to 6 | Y | 150 | TXD dominant timeout, overtemperature detection, undervoltage detection | N | 0.7 | 14 | ISO-11898-2:2016, SAE J2284-1, SAE J2284-2, SAE J2284-3, SAE J2284-4, SAE J2284-5 | N | 42 | Automotive, Industrial |
5 ドキュメント
コンパクトリスト
サポート情報 (1)
データ・シート (1)
パッケージ情報 (1)
設計・リソース
ソフトウェア
クイック・リファレンス ソフトウェア・タイプ.
1 ソフトウェア提供
-
BSPとデバイスドライバ
Micro CANopen Plus
この製品をサポートするその他のパートナー製品を見つけるには、当社の Web サイトにアクセスしてください パートナーマーケットプレイス.
サポート
最近閲覧した商品
There are no recently viewed products to display.
閲覧履歴を表示または編集する