デザイン・ファイル
完全な内訳を受け取ります。 製品の設置面積などについては、 eCad ファイル.
PowerQUICC® III Processor with DDR2, PCI, PCI Express®, SerDes, 1 GB Ethernet, Security
NXP has developed four next-generation PowerQUICC™ III processors based on the scalable e500 system-on-chip (SoC) platform and Power Architecture processor core. These PowerQUICC® III processors, the MPC8548E, MPC8547E, MPC8545E and MP8543E, are designed to deliver gigahertz-plus communications processing performance and advanced features with the exceptional integration and high-speed connectivity required by enterprise networking, telecom transmission and switching, 3G wireless infrastructure, storage and high-end imaging markets. The processors are designed to offer clock speeds scaling up to 1.5 GHz. They combine the powerful processor core, enhanced peripherals and high-speed interconnect technology to balance processor performance with I/O system throughput.
The next-generation PowerQUICC III processors are based on NXP®'s 90 nanometer (nm) silicon-on-insulator (SOI) copper interconnect process technology, which enables processors to deliver higher performance with lower power dissipation. At 1.5 GHz, these new processors deliver a significant performance increase over current 130 nm PowerQUICC III devices.
The MPC8548E, MPC8547E, MPC8545E and MP8543/E processors offer a wide range of high-speed connectivity options, including Gigabit Ethernet, Serial RapidIO® technology and PCI Express. Support for these high-speed interfaces enables scalable connectivity to network processors and/or ASICs in the data plane while the PowerQUICC III handles complex, computationally demanding control plane processing tasks. These processors also feature next-generation double data rate (DDRII) memory controller, enhanced, Gigabit Ethernet support, double precision floating point and integrated security engines that support the Kasumi alogrithm needed for 3G wireless security. In addition, support is provided for XOR acceleration needed for parity in storage applications.
The 8543E, 8545E, 8547E, and 8548E: Application-Specific and Market-Driven
MPC8548E networking/telecom processor - Key features include 512 KB L2 cache, integrated security engine, 64-bit DDR1/2 scaling to 533 MHz data rate, dual 32-bit PCI or 64-bit PCI-X, 4-bit Serial RapidIO fabric technology and 4-bit PCI-Express (or single 8-bit PCI Express 1.0a), local bus IO interfaces, and four Gigabit Ethernet interfaces. The combination of these features makes this device an optimal communications processing solution for Ethernet-only or RapidIO interworking applications, such as enterprise networking, telecom transmission and switching and 3G wireless basestations. The security engine includes Kasumi algorithm acceleration, making the MPC8548E an ideal choice for enhancing security protocol processing in 2.5G and 3G wireless network infrastructure.
MPC8547E storage processor - Key features include 512 KB L2 cache, integrated security acceleration with Exclusive Or (XOR) capability, support for battery-backed 64-bit DDR1/2 scaling to 533 MHz data rate, 64-bit PCI-X, 8-bit PCI Express and four Gigabit Ethernet interfaces. The device's XOR acceleration enhances system performance by offloading the compute-intensive parity checks in small-medium business (SMB) and enterprise redundant array of inexpensive disks (RAID) storage applications.
MPC8545E imaging processor - Key features include 512 KB L2 cache, 64-bit DDR1/2 scaling up to 533 MHz data rate, integrated security, dual 32-bit PCI/single 64-bit PCI, 4-bit PCI Express and two Gigabit Ethernet interfaces. The MPC8545E also offers double precision floating point, a capability that makes this device a high-performance processing solution for a wide range of imaging applications.
MPC8543E general-purpose control processor - Key features include 256 KB L2 cache, integrated security, 64-bit DDR1/2 scaling up to 400 MHz data rate, 32-bit PCI, 4-bit Serial RapidIO or 4-bit PCI Express, and two Gigabit Ethernet interfaces. With clock frequencies scaling from 800 MHz to 1 GHz, this cost-effective device is ideally suited for a wide range of general-purpose embedded control applications, such as robotics, discrete manufacturing and process manufacturing control.
製品詳細
Features
- Secure Communications Architecture leveraging Mocana's Device Security Framework technology
-
Embedded e500 core, scaling up to 1.5 GHz
- Dual Dispatch super-scaler, 7-stage pipeline design with out-of-order issue and execution
- 3065 MIPS at 1333 MHz (estimated Dhrystone 2.1)
-
Integrated L1/L2 cache
- L1 cache -32 KB data and 32 KB instruction cache with line-locking support
- L2 cache -512 KB (8-way set associative); 512 KB/256 KB/128 KB/64 KB can be used as SRAM
- L1 and L2 hardware coherency
- L2 configurable as SRAM, cache or stash cache
-
Integrated DDR memory controller with full ECC support, supporting:
- 200 MHz clock rate (400 MHz data rate), 64-bit, 2.5 V / 2.6 V I/O, DDR SDRAM
- 266 MHz clock rate (up to 533 MHz data rate) DDR2 SDRAM
- Double-precision embedded scalar and vector floating-point APUs
- Memory management unit (MMU)
- Integrated security engine supporting DES, 3DES, MD-5, SHA-1/2, AES, RSA, RNG, Kasumi F8/F9 and ARC-4 encryption algorithms.
-
Multiple PCI interface support
- 64-bit PCI 2.2 bus controller (up to 66 MHz, 3.3 V I/O)
- 64-bit PCI-X bus controller (up to 133 MHz, 3.3 V I/O), or
- Flexibility to configure two 32-bit PCI controllers
-
Four on-chip triple-speed Ethernet controllers (GMACs) supporting 10- and 100-Mbps, and 1-Gbps Ethernet/802.3 networks with MII, RMII, GMII, RGMII, RTBI and TBI physical
interfaces.
- TCP/IP checksum acceleration
- Advanced QoS features
- General-purpose I/O
-
Serial RapidIO and PCI Express high-speed interconnect interfaces, supporting
- Single x8 PCI Express, or
- Single x4 PCI Express and single 4x Serial RapidIO
- On-chip network (OCeaN) switch fabric
- Integrated four-channel DMA controller
- Dual I²C interfaces and Dual Universal Asynchronous Receiver/Transmitter (DUART) support
- Programmable interrupt controller (PIC)
- General-purpose parallel I/O (GPIO)
- IEEE 1149.1 JTAG test access port
- 1.1 V core voltage with 3.3 V and 2.5 V I/O
- 783-pin FC-BGA package
- This product is included in NXP product longevity program, with assured supply for a minimum of 10 years after launch
購入/パラメータ
|
|
|
|
|
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
設計・リソース
ハードウェア
クイック・リファレンス
ボードタイプ.
3 ハードウェア提供
-
エミュレータ、プローブ、プログラマPower Architecture® processor ( COP ) Probe Tips for CodeWarrior® TAP
-
エミュレータ、プローブ、プログラマCodeWarrior® TAP
-
ソフトウェア
クイック・リファレンス ソフトウェア・タイプ.
3 ソフトウェア・ファイル
-
設定ツール
UPM Tool for PowerQUICC® II Pro and PowerQUICC III Processors
-
BSPとデバイスドライバ
Linux BSP for Freescale MPC8548ECDS
注: より快適にご利用いただくために、ソフトウェアのダウンロードはデスクトップで行うことを推奨します。
エンジニアリング・サービス
NXPから直接サポートを受けるには、以下のサイトをご覧ください。 エンジニアリング・サービス.
3 エンジニアリング・サービス
-
インディペンデントデザインハウス (IDH)
ハードウェア/ソフトウェア・エンジニアリング・サービス
-
インディペンデントデザインハウス (IDH)
トラステッド・アドバイザ・サービス
-
インディペンデントデザインハウス (IDH)
AndroidおよびLinuxエンジニアリングサポート
この製品をサポートするその他のパートナー製品を見つけるには、当社の Web サイトにアクセスしてください パートナーマーケットプレイス.
トレーニング
7 トレーニング
-
オンデマンドウェビナー
INTEGRITY Training
-
オンデマンドウェビナー
PHX-MPC85xx
-
オンデマンドウェビナー
Microware OS-9 RTOS insights
-
オンデマンドウェビナー
MULTI Training
-
オンデマンドウェビナー
PHX-MPC853x
-
オンデマンドウェビナー
PHX-MPC8572E
-
オンデマンドウェビナー
PHX-MPC854x