Arm Cortex-M4|Kinetis K10 50 MHz 32-bit MCUs

Arm Cortex-M4|Kinetis K10 50 MHz 32-bit MCUs | NXP Semiconductors

動画の上をクリックすると再生されます。

The Kinetis K10 50 MHz family of baseline, low-power MCUs offers high feature integration in a small form factor, making them ideal for space-and cost-constrained applications.

Provides a scalable entry point into the mid-performance Kinetis portfolio
Includes a rich suite of analog, communication, timing and control peripherals to accommodate a wide range of requirements
Enables performance efficient designs
Shares the comprehensive enablement and scalability of the Kinetis portfolio

データ・シート

リファレンス・マニュアル

製品詳細

ブロック図

Kinetis K10 Entry Level Baseline MCUs Block Diagram

図を取得する PDF

Features

Ultra-Low-Power

11 low-power modes with power and clock gating for optimal peripheral activity and recovery times. Stop currents of <190 nA (VLLS0), run currents of <270 uA/MHz, 4 µs wake-up from Stop mode
Full memory and analog operation down to 1.71 volts for extended battery life
Low-leakage wake-up unit with up to eight internal modules and 16 pins as wake-up sources in low-leakage stop (LLS)/very low-leakage stop (VLLS) modes
Low-power timer for continual system operation in reduced power state

Flash, SRAM and FlexMemory

32 KB-128 KB flash. Fast access, high reliability with 4-level security protection
Up to 16 KB of SRAM
FlexMemory: Up to 2 KB of user-segmentable byte write/erase EEPROM for data tables/system data. EEPROM with over 10M cycles and flash with 70 µsec write time (brownouts without data loss or corruption). No user or system intervention to complete programming and erase functions and full operation down to 1.71 volts. In addition, FlexNVM from 32 KB for extra program code, data or EEPROM backup.

Mixed-Signal Capability

High-speed 16-bit ADC with configurable resolution. Single or differential output mode operation for improved noise rejection. 500 ns conversion time achievable with programmable delay block triggering
Up to two high-speed comparators providing fast and accurate motor over-current protection by driving PWMs to a safe state
Optional analog voltage reference provides an accurate reference to analog blocks and replaces external voltage references to reduce system cost

Performance

50 MHz Arm^® Cortex^®-M4 core with DSP instruction set, single cycle MAC and single instruction multiple data (SIMD) extensions.
Up to 4-channel DMA for peripheral and memory servicing with reduced CPU loading and faster system throughput
Cross bar switch enables concurrent multi-leaders bus accesses, increasing bus bandwidth
Independent flash banks allow concurrent code execution and firmware updating with no performance degradation or complex coding routines

Timing and Control

Up to two FlexTimers with a total of 10 channels. Hardware dead-time insertion and quadrature decoding for motor control
Carrier modulator timer for infrared waveform generation in remote control applications
Four-channel 32-bit periodic interrupt timer provides time base for RTOS task scheduler or trigger source for ADC conversion and programmable delay block

Human-Machine Interface

Hardware touch-sensing interface with up to 16 inputs. Operates in low power modes (minimum current adder when enabled). Hardware implementation avoids software polling method. High sensitivity level allows use of overlay surfaces upto 5 mm thick

Connectivity and Communications

Up to three UARTs. One UART supports RS232 with flow control, RS485, ISO7816 and IrDA. All other two UARTS support RS232 with flow control and RS485
One inter-IC Sound (I²S) serial interface for audio system interfacing
One DSPI and one I²C

Reliability, Safety and Security

Memory protection unit provides memory protection for all leaders on the cross bar switch, increasing software reliability
Cyclic redundancy check engine validates memory contents and communication data, increasing system reliability
Independent-clocked COP guards against clock skew or code runaway for fail-safe applications such as the IEC 60730 safety standard for household appliances
External watchdog monitor drives output pin to safe state external components if watchdog event occurs
This product is included in NXP’s product longevity program, with assured supply for a minimum of 10 years after launch

パーツ説明を表示	状況	コア・タイプ	動作周波数[最大](MHz)	SRAM (kB)	Flash (kB)	EEPROM (KB)	UART	SPI	I²C	汎用I/O	ADC (16 bit)	16-bit PWM	セキュリティ	電源電圧 [最小] (V)	電源電圧 [最大] (V)	パッケージタイプ	パッケージ端子数	Package Dimensions (LxWxZ (mm))	Package Pitch (mm)	Ambient Operating Temperature (Min to Max) (℃)
MK10DN128VFM5 データ・シート	アクティブ	Arm Cortex-M4	50	16	128	—	3	1	1	24	1	10	CRC	1.71	3.6	HVQFN32	32	5 x 5 x 0.9	0.5	-40 to 105
MK10DN128VFT5 データ・シート	アクティブ	Arm Cortex-M4	50	16	128	—	3	1	1	33	1	10	CRC	1.71	3.6	HVQFN48	48	7 x 7 x 1	0.5	-40 to 105
MK10DN128VLF5 データ・シート	アクティブ	Arm Cortex-M4	50	16	128	—	3	1	1	33	1	10	CRC	1.71	3.6	LQFP48	48	7 x 7 x 1.4	0.5	-40 to 105
MK10DN128VLH5 データ・シート	アクティブ	Arm Cortex-M4	50	16	128	—	3	1	1	44	1	10	CRC	1.71	3.6	LQFP64	64	10 x 10 x 1.4	0.5	-40 to 105
MK10DN128VMP5 データ・シート	アクティブ	Arm Cortex-M4	50	16	128	—	3	1	1	44	1	10	CRC	1.71	3.6	LFBGA64	64	5 x 5 x 1.23	0.5	-40 to 105
MK10DN32VFM5 データ・シート	アクティブ	Arm Cortex-M4	50	8	32	—	3	1	1	24	1	10	CRC	1.71	3.6	HVQFN32	32	5 x 5 x 0.9	0.5	-40 to 105
MK10DN32VFT5 データ・シート	アクティブ	Arm Cortex-M4	50	8	32	—	3	1	1	33	1	10	CRC	1.71	3.6	HVQFN48	48	7 x 7 x 1	0.5	-40 to 105
MK10DN32VLF5 データ・シート	アクティブ	Arm Cortex-M4	50	8	32	—	3	1	1	33	1	10	CRC	1.71	3.6	LQFP48	48	7 x 7 x 1.4	0.5	-40 to 105
MK10DN32VLH5 データ・シート	アクティブ	Arm Cortex-M4	50	8	32	—	3	1	1	44	1	10	CRC	1.71	3.6	LQFP64	64	10 x 10 x 1.4	0.5	-40 to 105
MK10DN32VMP5 データ・シート	アクティブ	Arm Cortex-M4	50	8	32	—	3	1	1	44	1	10	CRC	1.71	3.6	LFBGA64	64	5 x 5 x 1.23	0.5	-40 to 105

設計・リソース

デザイン・ファイル

クイック・リファレンス設計・ファイルの種類.

2 設計・ファイル

シンボルおよびフットプリント
Kinetis^® Symbols, Footprints and Models

INTERNAL改訂 1.0Nov 27, 20171 KBCAD-SYMBOLFOOTPRINTS

ダウンロード
電卓
TFS FlexMem Endurance Calculator

ZIP改訂 vBeta025Aug 1, 20143.2 MBTFS_FLEXMEM_CALCULATOR

アカウントが必要です
ダウンロードToggle Dropdown
- キューに追加
- キューから削除
- ファイルサイズが大きい場合にお勧めします。
- キューを表示

ハードウェア

クイック・リファレンスボードタイプ.

1-5 の 11 ハードウェア提供

評価・開発ボード
Kinetis K20 50 MHz Tower System Module注目
アクティブ

TWR-K20D50M
エミュレータ、プローブ、プログラマ
Universal Multilink開発インターフェース
アクティブ

UMultilink
エミュレータ、プローブ、プログラマ
MCU-Link Debug Probe
アクティブ

MCU-LINK
追加ハードウェアを利用可能パートナー・ソリューションの特集を表示.
エミュレータ、プローブ、プログラマ
Tracelink - Advance Trace Capture
アクティブ

TRACELINK
エミュレータ、プローブ、プログラマ
LPC-Link2
アクティブ

OM13054
エミュレータ、プローブ、プログラマ
Universal Multilink FX高速開発インターフェース
アクティブ

U-MULTILINK-FX
エミュレータ、プローブ、プログラマ
PEmicro Cyclone programmer
アクティブ

CYCLONE
エミュレータ、プローブ、プログラマ
PEmicro Cyclone FX programmer

CYCLONE-FX
評価・開発ボード
MPC560x Calibration, Debug and Interface Boards
アクティブ

MPC560xBOARDS
評価・開発ボード
Ultra low-cost development tool for Kinetis MCUs
アクティブ

KWIKSTIK-K40
評価・開発ボード
MCU-LINK-MR Debug Probe with USB-C, Serial and Mobile Robotics Interfaces
アクティブ

MCU-LINK-MR

全て表示

5 ハードウェア提供

評価・開発ボード
Mikromedia 7 Capacitive

Mikromedia 7 Capacitive is a compact development board designed as a complete solution for the rapid development of multimedia and GUI-centric applications. As a fully fu...

By MIKROE Gold パートナー
評価・開発ボード
Fusion for ARM v8

Fusion for ARM v8 offers universal support for ARM Cortex MO, M3, M4, and M7 Microcontrollers on one board. The development board is equipped with a wide range of superio...

By MIKROE Gold パートナー
評価・開発ボード
Fusion for Kinetis v8

Fusion for Kinetis v8 offers support for a variety of NXP's popular ARM Cortex-M4 Microcontrollers on one board. The development board is equipped with a wide range of su...

By MIKROE Gold パートナー
評価・開発ボード
Mikromedia 7 Capacitive FPI with frame

Mikromedia 7 Capacitive FPI (FPI stands for Front Panel Integration) with frame is a compact development board designed as a complete solution for the rapid development o...

By MIKROE Gold パートナー
コンパニオン・シリコンとモジュール
NOR Flash

Micron manufactures a wide range of NOR Flash products, including Serial and quad SPI, Industry standard Parallel NOR flash and high performance parallel NOR Flash suppor...

By Micron Gold パートナー

この製品をサポートするその他のパートナー製品を見つけるには、当社の Web サイトにアクセスしてくださいパートナーマーケットプレイス.

エンジニアリング・サービス

NXPから直接サポートを受けるには、以下のサイトをご覧ください。エンジニアリング・サービス.

1 エンジニアリング・サービス

インディペンデントデザインハウス (IDH)
トラステッド・アドバイザ・サービス

By Green Hills Software PlatinumHQ: Santa Barbara, アメリカ合衆国対応地域: Americas, APAC, EMEA

この製品をサポートするその他のパートナー製品を見つけるには、当社の Web サイトにアクセスしてくださいパートナーマーケットプレイス.

ショッピング・カート

Kinetis K10-50 MHz, Mixed-Signal Integration Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core

製品詳細

ブロック図

Kinetis K10 Entry Level Baseline MCUs Block Diagram

Features

Ultra-Low-Power

Flash, SRAM and FlexMemory

Mixed-Signal Capability

Performance

Timing and Control

Human-Machine Interface

Connectivity and Communications

Reliability, Safety and Security

アプリケーション

インダストリアル

オートモーティブ

コンスーマ

購入/パラメータ

ドキュメント

絞り込み

アプリケーション・ノート (47)

FFT-Based Algorithm for Metering Applications - Application Note[AN4255]

Features of the FlexTimer Module[AN5142]

Power Management for Kinetis and ColdFire+ MCUs[AN4503]

Using Kinetis FlexMemory as enhanced EEPROM[AN4282]

Low-Power Rotation Sensing with L-C Sensors and Kinetis L MCUs[AN5052]

Low-Power Rotation Sensing with Magneto Resistive Sensors and Kinetis L MCUs[AN5047]

PMSM Sensorless FOC for a Fan Using the Kinetis KV10[AN4935]

Power supply options for Tower development plaftorm[AN4649]

Optimizing performance on Kinetis K-series MCUs[AN4745]

Production Flash programming best practices for Kinetis K and L MCUs[AN4835]

Cookbook for SAR ADC measurements[AN4373]

Tips using PDB in motor control applications on Kinetis[AN4822]

I2C non-blocking communication[AN4803]

AN2295: Developer's Serial Bootloader – Application Note[AN2295]

Deep-dive: Water Tolerance Feature in Touch-Sensing Software Library[AN4781]

An I2S application on Kinetis[AN4800]

Using DSPI as Follower on MQX RTOS (v3.8)[AN4791]

Integrating a Processor Expert driver (LDD) into a non-PEx project[AN4769]

AN4752: FreeMASTER Usage, Serial Driver Implementation – Application Note[AN4752]

Connecting Kinetis MCU with CMOS sensor interface through GPIO[AN4627]

AN4753: Rational ClearCase Use in CodeWarrior 10.3 – Application Note[AN4753]

PMSM electrical parameters measurement[AN4680]

Implementing in-software flash programming on Kinetis MCUs[AN4695]

I2C driver based on interrupt and blocking mechanism for MQX[AN4652]

MQX Board Support Package (BSP) - Porting Guide on KEIL[AN4626]

BLDC Sensorless Algorithm Tuning[AN4597]

Using Kinetis DMA and GPIO to emulate timer functionality[AN4419]

Using DMA to emulate ADC flexible scan mode on Kinetis K[AN4590]

Freescale Embedded Software and Motor Control libraries[AN4611]

Understanding the 16-bit ADC PGA in Kinetis K Series[AN4568]

PWM synchronization using Kinetis Flextimers[AN4560]

Robust over-the-air firmware update using program flash memory swap[AN4533]

Using Kinetis Security and Flash Protection Features[AN4507]

I2S (Inter-IC Sound Bus) application on Kinetis MCUs[AN4520]

Using CMSIS-DSP Algorithms with MQX and Kinetis® MCUs[AN4489]

Audio Output for Kinetis MCUs using DMA/PWM, DAC or I2S[AN4369]

Low-Power management with MQX RTOS on Kinetis MCUs[AN4447]

Display eGUI using TWR-LCD board[AN4452]

Configuring the FlexTimer for position and speed measurement[AN4381]

Kinetis® KwikStik-based EzPort programmer[AN4406]

FlexTimer and ADC synchronization for Field-Oriented-Control[AN4410]

Prototyping with Tower System MCU development board[AN4390]

BLDC motor control w/ Hall Effect sensor - Kinetis MCUs[AN4376]

Using I2C on Coldfire+ and Kinetis MCUs[AN4342]

Using USB2SER DLL in C# Projects[AN4314]

AN3863, Designing Touch Sensing Electrodes - Application Notes[AN3863]

Writing Touch Sensing Software Using TSI Module[AN4330]

アプリケーション・ノート・ソフトウェア (9)

Software for AN5047[AN5047SW]

Software for AN5052.[AN5052SW]

Software files for Application Note AN4800[AN4800SW]

Software files for Application Note AN4652[AN4652SW]

Software files for Application Note AN4419[AN4419SW]

Software for AN4590[AN4590SW]

Software files for Application Note AN4533[AN4533SW]

Associated software for AN4369[AN4369SW]

Using CEA709.1 features in Kinetis®[AN4396SW]

エラッタ (3)

Kinetis K10-50 MHz, Mixed-Signal Integration Microcontrollers (MCUs) based on Arm^® Cortex^®-M4 Core

Using CMSIS-DSP Algorithms with MQX and Kinetis^® MCUs[AN4489]

Kinetis^® KwikStik-based EzPort programmer[AN4406]

Using CEA709.1 features in Kinetis^®[AN4396SW]

Errata Mask 1N86B for Kinetis^® MCUs[KINETIS50MHZ_1N86B]

Embedded Solutions Based on Arm^® Technology Guide[NXPARM]

Kinetis^® K1x/K2x (50Mhz) for cost sensitive applications[BRKINETISELS]

Kinetis^® K1x: Baseline Cortex-M4(F) MCUs[KNTSK10FMLYFS]