Arm Cortex-M4|Kinetis K11 50 MHz 32-bit MCUs

動画の上をクリックすると再生されます。

The Kinetis^® K11 50 MHz baseline MCUs, built on the Arm^® Cortex^®-M4 core, are optimized for cost-sensitive applications requiring low-power, security encryption, tamper detection and processing efficiency. This family shares the comprehensive enablement and scalability of the Kinetis portfolio.

Please contact your local NXP representative to download the K11 Security Data sheet and Reference Manual documents (under NDA).

データシート

リファレンス・マニュアル

製品詳細

ブロック図

Kinetis K11 50 MHz Baseline MCUs Block Diagram

図を取得する PDF

Features

Low-Power

11 low-power modes with power and clock gating for optimal peripheral activity and recovery times. 4 µs wake-up from Stop mode
Full memory and analog operation down to 1.71 volts for extended battery life
Low-leakage wake-up unit with up to eight internal modules and 16 pins as wake-up sources in low-leakage stop (LLS)/very low-leakage stop (VLLS) modes
Low-power timer for continual system operation in reduced power state

Flash, SRAM and FlexMemory

128 KB-512 KB flash. Fast access, high reliability with 4-level security protection
Up to 64 KB FlexRAM
FlexMemory
- Up to 4 KB of user-segmentable byte write/erase EEPROM for data tables/system data
- EEPROM with over 10M cycles and flash with 100 µsec write time (brownouts without data loss or corruption)
- No user or system intervention to complete programming and erase functions and full operation down to 1.71 volts
- In addition, FlexNVM from 64 KB for extra program code, data or EEPROM backup

Performance

50 MHz Cortex-M4 core with DSP instruction set, single cycle MAC and single instruction multiple data (SIMD) extensions
Up to 16-channel DMA for peripheral and memory servicing with reduced CPU loading and faster system throughput0 MHz core
Cross bar switch enables concurrent multi-leader bus accesses, increasing bus bandwidth

Timing and Control

Up to two FlexTimers with a total of 10 channels. Hardware dead-time insertion and quadrature decoding for motor control
Carrier modulator timer for infrared waveform generation in remote control applications
Four-channel 32-bit periodic interrupt timer provides time base for RTOS task scheduler or trigger source for ADC conversion and programmable delay block

Connectivity and Communications

Up to three UARTs. One UART supports RS232 with flow control, RS485, ISO7816 and IrDA. All other two UARTS support RS232 with flow control and RS485
One inter-IC Sound (I²S) serial interface for audio system interfacing
One DSPI and one I²C

Reliability, Safety and Security

Hardware Encryption coprocessor for secure data transfer and storage
- Faster than software implementations and with minimal CPU loading
- Supports a wide variety of algorithms - DES, 3DES, AES, MD5, SHA-1, SHA-256
System security and tamper detect with secure real-time clock with independent battery supply. Secure key storage with internal/external tamper detect for unsecure flash, temperature, clock, and supply voltage variations and physical attack detection
Cyclic redundancy check engine validates memory contents and communication data, increasing system reliability
Independent-clocked COP guards against clock skew or code runaway for fail-safe applications such as the IEC 60730 safety standard for household appliances
External watchdog monitor drives output pin to safe state external components if watchdog event occurs

K21_50

アクティブ

類似

Kinetis^® K21-50 MHz, Full-Speed USB, Anti-Tamper Microcontrollers based on Arm^® Cortex^®-M4 Core

データシート:
PDF

K60_120

アクティブ

類似

Kinetis^® K60/61-120–150 MHz, Mixed-Signal Integration and Anti-Tamper Microcontrollers based on Arm^® Cortex^®-M4 Core

データシート:
PDF

K21_120

アクティブ

類似

Kinetis K21-120 MHZ, Full-Speed USB, Anti-Tamper Microcontrollers based on Arm^® Cortex^®-M4

データシート:
PDF

購入/パラメータ

‌ ‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌

設計・リソース

デザイン・ファイル

クイック・リファレンス設計・ファイルの種類.

2 設計・ファイル

完全な内訳を受け取ります。 製品の設置面積などについては、 eCad ファイル.

シンボルおよびフットプリント
Kinetis^® Symbols, Footprints and Models

INTERNAL改訂 1.0Nov 27, 2017 11:23:001 KBCAD-SYMBOLFOOTPRINTS

ダウンロード
電卓
TFS FlexMem Endurance Calculator

ZIP改訂 vBeta025Aug 1, 2014 00:00:003.2 MBTFS_FLEXMEM_CALCULATOR

アカウントが必要です
ダウンロードToggle Dropdown
- キューに追加
- キューから削除
- ファイルサイズが大きい場合にお勧めします。
- キューを表示

ハードウェア

クイック・リファレンスボードタイプ.

1-5 の 10 ハードウェア提供

エミュレータ、プローブ、プログラマ
Universal Multilink開発インターフェース注目

UMultilink
評価・開発ボード
Kinetis K21 50 MHz MCU Tower System Module注目

TWR-K21D50M
エミュレータ、プローブ、プログラマ
MCU-Link Debug Probe

MCU-LINK
追加ハードウェアを利用可能パートナー・ソリューションの特集を表示.
エミュレータ、プローブ、プログラマ
Tracelink - Advance Trace Capture

TRACELINK
エミュレータ、プローブ、プログラマ
PEmicro Cyclone programmer

CYCLONE
エミュレータ、プローブ、プログラマ
PEmicro Cyclone FX programmer

CYCLONE-FX
エミュレータ、プローブ、プログラマ
LPC-Link2

OM13054
エミュレータ、プローブ、プログラマ
Universal Multilink FX高速開発インターフェース

U-MULTILINK-FX
評価・開発ボード
MPC560x Calibration, Debug and Interface Boards

MPC560xBOARDS
評価・開発ボード
MCU-LINK-MR Debug Probe with USB-C, Serial and Mobile Robotics Interfaces

MCU-LINK-MR

全て表示

1-5 の 8 ハードウェア提供

評価・開発ボード
Mikromedia 7 Capacitive

Mikromedia 7 Capacitive is a compact development board designed as a complete solution for the rapid development of multimedia and GUI-centric applications. As a fully fu...

By MIKROE Gold パートナー
評価・開発ボード
Fusion for ARM v8

Fusion for ARM v8 offers universal support for ARM Cortex MO, M3, M4, and M7 Microcontrollers on one board. The development board is equipped with a wide range of superio...

By MIKROE Gold パートナー
評価・開発ボード
Fusion for Kinetis v8

Fusion for Kinetis v8 offers support for a variety of NXP's popular ARM Cortex-M4 Microcontrollers on one board. The development board is equipped with a wide range of su...

By MIKROE Gold パートナー
評価・開発ボード
Mikromedia 7 Capacitive FPI with frame

Mikromedia 7 Capacitive FPI (FPI stands for Front Panel Integration) with frame is a compact development board designed as a complete solution for the rapid development o...

By MIKROE Gold パートナー
テストアクセサリ、デバッガ
Flasher Compact

Flasher Compact is the compact twin to the Flasher PRO, primarily designed for installation into production rigs or automated test equipment (ATE) where production space ...

By SEGGER Microcontroller GmbH Gold パートナー
テストアクセサリ、デバッガ
J-Link PRO PoE

J-Link PRO PoE is SEGGER's specialized programming / debug probe for creating test farms. It can draw power via Ethernet and supplies power to the target either via d...

By SEGGER Microcontroller GmbH Gold パートナー
テストアクセサリ、デバッガ
CODEGRIP for ARM

CODEGRIP for ARM is a fast USB-C and WiFi programmer and hardware debugger. It supports ARM Cortex-M0, M3,M4 and M7 based MCUs. With a set of unique and innovative funct...

By MIKROE Gold パートナー
テストアクセサリ、デバッガ
I-jet

I-jet is a high-performing in-circuit debugging probe for ARM. It is capable of delivering power to the target board and measuring target power consumption. I-jet is full...

By IAR Platinum パートナー