デザイン・ファイル
完全な内訳を受け取ります。 製品の設置面積などについては、 eCad ファイル.
H-Bridge, Brushed DC Motor Driver, 5-28 V, 5 A, 10 kHz
The NXP® MC33887 is a monolithic H-Bridge power IC with a load current feedback feature making it ideal for closed-loop DC motor control.
- The IC incorporates internal control logic, charge pump, gate drive, and low RDS(ON) MOSFET output circuitry
- Able to control inductive loads with continuous DC load currents up to 5.0 A, and with peak current active limiting between 5.2 A and 7.8 A
- Output loads can be pulse width modulated at frequencies up to 10 kHzdervoltage, overtemperature, and overcurrent conditions are detected and reported via a status flag output
- The load current feedback feature provides a proportional constant-current output suitable for monitoring by a MCU’s A/D input, which facilitates the design of closed-loop torque/speed control as well as open load detection
製品詳細
Features
Key Features
- Fully specified operation 5.0 V to 28 V
- Limited operation with reduced performance up to 40 V
- 120 mΩ RDS(ON) typical H-Bridge MOSFETs
- TTL/CMOS compatible inputs
- PWM frequencies up to 10 kHz
- Active current limiting (regulation)
- Fault status reporting
- Sleep mode with current draw ≤50 μA (inputs floating or set to match default logic states)
- Polarity control through two independent inputs
- Exhibit high-impedance through two disable inputs
- Load supply voltage min. 5 V, max. 28 V
- Parallel interface and input control
- Ambient operating temperature -40 to 125 °C
Product Longevity Program
- This product is included in the NXP Product Longevity Program ensuring a stable supply of products for your embedded designs. The MC33887 is included in the 15-year program
購入/パラメータ
|
|
|
|
|
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ドキュメント
クイック・リファレンス ドキュメンテーションの種類.
