8-bit LCD for Battery-Powered and Handheld LC MCUs
デザイン・ファイル
完全な内訳を受け取ります。 製品の設置面積などについては、 eCad ファイル.
8-bit with LCD Driver LH MCUs
Our S08 ultra-low-power MCU features a LCD driver and increased analog-to-digital converter (ADC) accuracy for medical and metering applications. The MC9S08LH family, with up to 64 KB flash, helps you reach target performance levels while minimizing power consumption in your design, demonstrating extreme energy efficiency for ultra-long operation in battery-powered applications.
製品詳細
ブロック図
Features
S08 Central Processor Unit (CPU)
- Up to 40 Mhz CPI at 3.6V to 2.1V
- Up to 20 MHz CPU at 2.1V to 1.8V across temperature range of -40°C to +85°C
- HCS08 instruction set with added BGND instruction
Enablement and Development Support
- Low-cost, reconfigurable Tower® evaluation and demonstration platform
- Breakpoint capability
Power-Saving Features
- Two ultra-low-power stop modes, one of which allows limited use of peripherals
- New low-power run and wait modes
- 6 µs typical wake-up time from stop mode
- Internal clock source (ICS) module containing a frequencylocked loop (FLL) controlled by internal or external reference
- Ultra-low-power oscillator (OSC)
- Clock gating disables clocks to unused peripherals
16-bit ADC for Metering Applications
- 16-bit resolution ADC with 4.0625 µs sampling rate in 16-bit single ended mode and sample times as fast as 2.04 µs in 8 bit mode
- One differential ADC input, and 8 single-ended ADC inputs or 10 single-ended inputs
- Automatic compare function and hardware average function
- Internal temperature sensor
- Selectable voltage reference
- Operation in low-power modes
- Built in self-calibration with user configurable offset register
- Hardware triggers using two TPM channels or TOD. Two control and result register
- Input clock selectable from up to four sources and configurable sample time and conversion speed/power
LCD Driver and Internal Charge Pump
- Integrated LCD driver supports both standard 3V and 5V LCD glass
- Configurable display for 8 x 36 or 4 x 40 segment display
- Low-power blinking mode
- Internal charge pump
- Front plane (FP) and back plane (BP) re-assignments
- Capable of running in STOP3 and STOP2 mode
- LCD driver pins are muxed with GPIO and other functions
On-Chip Memory
- Up to 64 KB flash compromised of two separate arrays to facilitate read/program/erase over full operating voltage and temperature
- 1.8V to 3.6V RAM
Peripherals
-
Timer
- Two 2-channel (TPM1 and TPM2)
- Selectable input capture
- Output compare
- Buffered-edge or center-aligned PWM on each channel
-
Two serial communications interfaces (SCI)
modules
- Asynchronous communications
- 13-bit break option
- Flexible baud rate generator
- Double buffered transmit and receive and optional HW parity checking and generation
-
Analog comparator with selectable interrupt on
rising
- Falling or either edge or comparator output
- Compare option to fixed internal bandgap reference voltage
- Outputs can be optionally routed to TPM module
- Operation in STOP3
-
Serial peripheral interface (SPI) module
- Full-duplex or single-wire bidirectional
- Double-buffered transmit and receive leader or follower mode
- MSB-first or LSB first shifting
-
I²C with up to 100 kbps with maximum bus
loading
- Multicontroller operation
- Programmable target address
- Interruptdriven byte-by-byte data transfer
- Support for broadcast mode and 10-bit addressing
Input/Output
- Up to 39 general purpose input/output (GPIO)
- two output-only pins
- Eight keyboard interrupt (KBI) pins with selectable polarity
System Protection
- Watchdog computer operating properly (COP) reset with option to run from dedicated 1 kHz internal clock source or bus clock
- Low-voltage detection with reset or interrupt, selectable trip points
- Illegal op code and illegal address detection with reset
- Flash block protection
購入/パラメータ
|
|
|
|
|
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ドキュメント
クイック・リファレンス ドキュメンテーションの種類.
1-5 の 26 ドキュメント
-
データ・シート
MC9S08LH64 Series - Data Sheet注目
-
アプリケーション・ノート
Migration Guide from S08 to Kinetis L Series MCUs注目
-
リファレンス・マニュアル
MC9S08LH64RM注目
-
リファレンス・マニュアル
Thermostat Reference Design Using the MC9S08LL16
設計・リソース
ハードウェア
クイック・リファレンス
ボードタイプ.
4 ハードウェア提供
-
エミュレータ、プローブ、プログラマUniversal Multilink開発インターフェース注目
-
エミュレータ、プローブ、プログラマPEmicro Cyclone programmer
-
エミュレータ、プローブ、プログラマPEmicro Cyclone FX programmer
-
エミュレータ、プローブ、プログラマUniversal Multilink FX高速開発インターフェース
ソフトウェア
クイック・リファレンス ソフトウェア・タイプ.
1-5 の 8 ソフトウェア・ファイル
-
BSPとデバイスドライバ
Graphical LCD Driver for MCUs/MPUs注目
-
追加ソフトウェアを利用可能 パートナー・ソリューションの特集を表示.
注: より快適にご利用いただくために、ソフトウェアのダウンロードはデスクトップで行うことを推奨します。
