Features
Battery Cell Controller, Advanced, 6 Channels, TPL, LQFP48.
Package
HLQFP48 LQFP64, plastic, low profile quad flat package; 64 terminals; 0.5 mm pitch; 10 mm x 10 mm x 1.4 mm body.
購入オプション
UJA1164TK,118
生産終了 (EOL)
12NC: 935294616118
詳細
注文
操作機能
| パラメータ | 値 |
|---|---|
Category | SBC; CAN |
Supported standards | ISO-11898-2; ISO-11898-5; ISO-11898-6 |
Low power modes | Standby Mode |
Supply voltage [min] (V) | 3 |
Supply voltage [max] (V) | 40 |
Data rate [max] (kb/s) | 2000 |
CAN channels | 1 |
LIN channels | 0 |
Voltage on bus pins [min] | -58 |
Voltage on bus pins [max] | 58 |
| パラメータ | 値 |
|---|---|
VIO option available | No |
Recommended Version | 100mA |
Rth(j-a) (K/W) | 60 |
SPLIT pin | No |
Under-voltage detection | Yes |
TX Dominant Time out | Yes |
Over-temperature detection | Yes |
INH / Wake Pin | No |
Min High Input Levels (V) | 0.75 x Vv1 |
環境
| Part/12NC | 鉛フリー | EU RoHS | ハロゲンフリー | RHFインジケーター | REACH SVHC | Weight (mg) |
|---|---|---|---|---|---|---|
UJA1164TK,118(935294616118) | Yes | Yes Certificate Of Analysis (CoA) | Yes |  | REACH SVHC | 39.9438390816 |
品質
| Part/12NC | 安全保障機能安全 | 吸湿感度レベル (MSL) | Peak Package Body Temperature (PPT) (C°) | ||
|---|---|---|---|---|---|
| 鉛はんだ | 鉛フリーはんだ | 鉛はんだ | 鉛フリーはんだ | ||
UJA1164TK,118 (935294616118) | Quality Managed | 1 | 1 | 240 | 260 |
配送
| Part/12NC | 関税分類番号（米国)免責事項: |
|---|---|
UJA1164TK,118 (935294616118) | 854239 |
詳細 UJA1164TK
This part is not recommended for new designs. For new designs, we recommend UJA1164ATK.
The UJA1164 is a mini high-speed CAN System Basis Chip (SBC) containing an ISO 11898-2/5 compliant HS-CAN transceiver and an integrated 5 V/100 mA supply for a microcontroller. It also features a watchdog and a Serial Peripheral Interface (SPI). The UJA1164 can be operated in a very low-current Standby mode with bus wake-up capability and supports ISO 11898-6 compliant autonomous CAN biasing.
The UJA1164 implements the standard CAN physical layer as defined in the current ISO11898 standard (-2 and -5). Pending the release of the updated version of ISO11898 including CAN FD, additional timing parameters defining loop delay symmetry are included. This implementation enables reliable communication in the CAN FD fast phase at data rates up to 2 Mbit/s.
A number of configuration settings are stored in non-volatile memory, allowing the SBC to be adapted for use in a specific application. This makes it possible to configure the power-on behavior of the UJA1164 to meet the requirements of different applications.