-
FRDM-KW24D512
アクティブ -
Freedom Development Board for Kinetis KW21D, KW22D and KW24D MCUs.
- 2 FRDM-KW24D512 Freedom Development Boards
- Quick Reference Card
- 2 USB Cables
Freedom Development Platform for Kinetis® KW2x MCUs
Note: this page is made avaialble for historical reference only.
The FRDM-KW24D512 is a development platform based on the Our MKW24D512 Kinetis® W Series microcontroller and is enabled by software support for Thread, ZigBee Pro, 802.15.4 MAC, SMAC and Kinetis Software Development Kit (SDK). The FRDM-KW24D512 kit contains two boards, enabling point-to-point out of the box connectivity.
Kinetis MKW24D512 MCU is a low-power, compact integrated device consisting of a high-performance 2.4 GHz IEEE 802.15.4 compliant radio transceiver and a powerful Arm® Cortex®-M4 core system with connectivity and precision mixed-signal analog peripherals.
FRDM-KW24D512 evaluation boards are designed to work either in standalone mode or as part of the Freedom development platforms for quick application prototyping. They are fully supported by a comprehensive enablement environment.
製品詳細
対応製品
ワイヤレス・コネクティビティ
Thread
- KW2xD: Kinetis® KW2xD-2.4 GHz 802.15.4 Wireless Radio Microcontroller (MCU) based on Arm® Cortex®-M4 Core
Features
- Supports MKW24D512 Kinetis® microcontroller (up to 50 MHz Cortex-M4 MCU, 512 kB Flash)
- Full IEEE 802.15.4 compliant wireless node
- Software support: Thread, ZigBee Pro, 802.15.4 MAC, and SMAC, Kinetis Software Development Kit (SDK)
- Reference design area with small footprint, low-cost RF node:
- RF circuitry includes a Balun to convert the differential input/output pin of the MKW24D512 transceiver to single-ended for onboard signal routing
- Low off-chip component count
- Programmable output power from –35 dBm to +8 dBm at the SMA connector, no trap
- Receiver sensitivity: –102 dBm, typical
- Integrated PCB inverted F-type antenna and SMA RF port
- Selectable power sources
- 32 MHz reference oscillator
- 32 kHz clock oscillator
- 2.4 GHz frequency operation (ISM Band)
- External serial flash for over-the-air programming (OTAP) support
- Multiple push buttons and LEDs
- OpenSDA debug interface
- Combo sensor, 6-axis sensor with integrated linear accelerometer and magnetometer
Recommended Software and Tools
Kinetis MKW2xD and MCR20A Connectivity Software
Note: Although MCUXpresso SDK does include support for MKW2xD and FRDM-KW24D512, it does not include any connectivity software. For a complete SDK with included Connectivity Stacks please use the Kinetis MKW2xD and MCR20A Connectivity Software which supports Kinetis Design Studio and IAR Embedded Workbench.
Thread Networking Protocol An ideal way to connect and control products around the home
購入オプション
ドキュメント
クイック・リファレンス ドキュメンテーションの種類.
設計・リソース
ソフトウェア
クイック・リファレンス ソフトウェア・タイプ.
1-5 の 6 ソフトウェア・ファイル
-
接続ソフトウェア
Kinetis MKW2xD and MCR20A Connectivity Software (Linux)注目
-
接続ソフトウェア
Kinetis BeeStack ZigBee Protocol Stack注目
-
接続ソフトウェア
Kinetis MKW2xD and MCR20A Connectivity Software注目
-
開発IDEと構築ツール
Design Studio Integrated Development Environment (IDE)注目
-
接続ソフトウェア
Test Tool for Connectivity Products
注: より快適にご利用いただくために、ソフトウェアのダウンロードはデスクトップで行うことを推奨します。